Switch Life Tester
UL 60335-2-24 Figure 101.DVA.2 Articulate Probes 10.5-11.5 Year Age
UL 60335-2-24 Figure 101.DVA.2 Articulate Probes 10.5-11.5 Year Age Product Overview: This articulate probe meets the requirements of UL 60335-2-24 figure 101.DVA.2. It is used for hazard assessment for moving parts of refrigeration or similar products, the moving parts should not cause personal ...
IEC 60950-1 Figure EE.1 Figure EE.2 Wedge Probe For Testing Document Shredders
IEC 60950-1 Figure EE.1 and Figure EE.2 Wedge Probe for Testing Document Shredders Product Overview: This wedge probe meets the requirements of IEC 60950-1 Figure EE.1 and Figure EE.2, clause EE.5, it is used to check the protection against hazardous moving parts. The force is achieved by working ...
IEC 61032 Figure 8 Test Probe 12 Ф4mm Hardened Steel Test Pin
IEC 61032 Figure 8 Test Probe 12 Product Overview: This test probe conforms to the standard requirements of IEC 61032 figure 8 test probe 12, etc. This pin is intended to be used on appliances for verifying the inaccessibility of hazardous live parts or hazardous mechanical parts which are liable to ...
IEC 61032 Figure 9 Test Probe 13 With Nylon Handle M6 Thread Hole
IEC 61032 Figure 9 Test Probe 13 Product Overview: This probe conforms to the standard requirements of IEC 61032 figure 9 test probe 13, IEC60950 figure 2B, IEC 60335-1 clause 8.1.2, etc. This pin is intended to verify the protection against access to hazardous live parts in class 0 equipment and ...
IEC 61032 Figure 12 Test Probe 18 Ф8.6mm Children Finger Probe
IEC 61032 Figure 12 Test Probe 18 Product Overview: This probe conforms to the standard requirements of IEC 61032 figure 12 test probe 18, IEC 60065:2014 clause 9.1.1.3, etc. This probe is intended to simulate access to hazardous parts by children of more than 36 months and less than 14 years. Probe ...
IEC 61032 Figure 13 Test Probe 19 Ф5.6mm Children Finger Probe
IEC 61032 Figure 13 Test Probe 19 Product Overview: This probe conforms to the standard requirements of IEC 61032 figure 13 test probe 19, IEC 60065:2014 clause 9.1.1.3, etc. This probe is intended to simulate access to hazardous parts by children of 36 months or less. Probe Dimension: Hemispherical ...
IEC 61032 Figure 14 Test Probe 31 for Testing Food Waste Disposal Units
IEC 61032 Figure 14 Test Probe 31 Product Overview: This probe conforms to the standard requirements of IEC 61032 test probe 31 figure 14, etc. This probe is intended to verify the protection against access to hazardous mechanical parts of the grinding system of food waste disposal units. Probe ...
IEC 61032 Figure 15 Stainless Steel Test Probe 32 For Testing Fan Guards
IEC 61032 Figure 15 Test Probe 32 Product Overview: This probe conforms to the standard requirements of IEC 61032 test probe 32 figure 15, etc. This rod is intended to verify the protection provided by fan guards against access to hazardous mechanical parts. Probe Dimension: Probe diameter (mm) Ф25...
IEC 61032 Figure 16 Test Probe 41 For Testing Glowing Heating Elements
IEC 61032 Figure 16 Test Probe 41 Product Overview: This probe conforms to the standard requirements of IEC 61032 test probe 41 figure 16, IEC60335-1 Clause 8.1.3, etc. This probe is intended to verify the protection against to glowing heating elements. Probe Dimension: Probe cone part length (mm) ...
IEC 61032 Figure 17 Test Probe 43 For Testing Visibly Glowing Radiant Heaters
IEC 61032 Figure 17 Test Probe 43 Product Overview: This probe conforms to the standard requirements of IEC 61032 test probe 43 figure 17, etc. This bar is intended to verify the protection of fixed and portable visibly glowing radiant heaters. Probe Dimension and Material: Rectangular bar thickness ...
IEC 61032 Figure 7 Unjointed Test Probe 11 For Verifying Enclosure Openings
IEC 61032 Figure 7 Test Probe 11 IEC 61032 Figure 7 Unjointed Test Probe 11 For Verifying Enclosure Openings Product Overview: This probe conforms to the standard requirements of IEC61032 fig.7 test probe 11, IEC 60065:2014 clause 9.1.7, etc. This probe may be used to verify the protection of ...
IEC 60884-1 Annex C Plug Gripping Test Apparatus With Reference Plug
IEC 60884-1 Annex C Plug Gripping Test Apparatus Product information: This device is used to verify the plug clamping test. It conforms to IEC 60884-1 Annex C alternative gripping tests figure C.2, the reference plug as per C.1 also included. Technical parameters: 1. A reference plug required: the ...
IEC 60884-1 Figure 40 Insulating Sleeves Of Plug Pins Abnormal Heat Resistance Tester
IEC 60884-1 Figure 40 Insulating Sleeves of Plug Pins Abnormal Heat Resistance Test Apparatus Product information: This device meets the standards of IEC 60884-1:2013 clause 28.1.2 figure 40. It is applicable to test improper heating resistance and burning resistance of bolt and plug with insulation ...
IEC 60884 Clause 24.11 3mm Stainless Steel Cylindrical Test Tod With Nylon Handle
IEC 60884 Clause 24.11 3mm Cylindrical Test Tod Product Overview: The 3mm test rod conforms to the IEC 60884-1:2013 clause 24.11 requirement. A cylindrical steel rod, having a diameter of 3 mm and a hemispherical end with a radius of 1,5 mm, is pushed perpendicular to the supporting mounting surface...
IEC 60884 Figure 31 Arrangement For Test On Covers Or Cover Plates
IEC 60884 Figure 31 Arrangement for Test on Covers or Cover-plates Product Overview: This test apparatus conforms to IEC 60884-1:2013 clause 24.14 figure 31. It is used to verify the required retention and removal force for the cover or cover plate of switch or socket or other parts. The cover or ...
IEC60669-1 Plugs Sockets Switch Life Tester 3 Linear Stations
IEC60669-1 Plugs Sockets Switches Life Tester 3 Linear Stations Equipment overview: The test equipment has 3 synchronous stations, which can test linear switches, plugs and socket-outlets synchronously, it will automatic stop and alarm if one of the stations in abnormal running, and the other ...
Ф5mm Ball Pressure Test Apparatus With Rack Switch Life Tester
IEC60884-1 Ball Pressure Testing Apparatus Product overview: The Ball Pressure Tester conforms to many standard requirements, such as IEC60335-1, IEC60884-1, IEC60950 and so on. External parts of non-metallic material, parts of insulating material supporting live parts including connections and ...
Stainless Steel Straight Unjoint Test Probe IEC 62368-1 Figure V.1
IEC 62368-1 Figure V.1 Straight Unjoint Test Probe Product overview: This straight unjointed test probe meets the requirements of IEC 62368-1:2018 clause V.1.3, figure V.1 (but straight unjointed version), etc. It is used in the enclosure protection test of the electrical equipment. Test sample...
Figure 1 120 ° High Temperature Indentation Device IEC 60811-508
IEC 60811-508 Figure 1 High Temperature Indentation Device 3 Stations Product Introduction: This test device conforming to the standard of IEC 60811-508 Figure 1, IEC 60811-3-1 Figure 1 and etc. Technical Parameters: Item Parameters Model SN2141A Standard IEC 60811-508 Figure 1, IEC 60811-3-1 Figure ...
Cable Insulation Sheath Material Thermal Extension Test Device 3 Stations IEC 60245-1
IEC 60245-1 Cable Insulation Sheath Material Thermal Extension Test Device 3 Stations Product Introduction: This test device conforming to the standard of IEC 60245-1. The thermal extension device is refined with special high temperature resistant materials; it is used to detect the thermal ...
IEC 60669-1 Three Stations 300V 30A Load Cabinet For Switch Life Tester
IEC 60669-1 Three Stations 300V 30A Load Cabinet for Switch Life Tester Equipment Introduction: The load cabinet is designed and manufactured according to IEC60884-1, IEC61058-1, IEC60669-1 and etc. It is applicable for household and similar fixed electrical installations switches and plug sockets ...
IEC60884 Switch Life Tester 15A Low Temperature Test Chamber
IEC60884 Switch Life Tester Stainless Steel 15A Low-Temperature Test Chamber For Electrical Accessories Standard:IEC60884,IEC60811-1-4 , common test methods for insulating and sheathing materials of electric and optical cables-part 1-4:Methods for general application-Test at low temperature and etc. ...
16A Switch Life Tester IEC 60884-1 Power Cords Automatic Flexing Test Equipment With Safety Cover Mitsubishi PLC
IEC60884-1 Power Cords Automatic Flexing Test Equipment with Safety Protective Cover Standards & Clauses: IEC60335-1:2016 “Household and similar electrical appliances-Safety-Part1:General requirements” clause 23.3 and 25.14 IEC60884-1:2013 “Plugs and socket-outlets for household and similar purposes...
IEC 60884-1 Clause 12.3.11 Switch Life Tester Screwless Terminals Electrical And Thermal Stresses Test Apparatus
IEC 60884-1 Clause 12.3.11 Screwless Terminals Electrical and Thermal Stresses Test Apparatus Standard: IEC60884-1 clause 12.3.11. Application: It is used to check whether the screwless terminals can withstand the electrical and thermal stresses occurring in normal use. Test sample: Plugs and socket...
