Electrical Appliance Testing Equipment
IEC 60950-1 Clause 4.2.5 Enclosures Against Ingress Test Probe 1 Figure 5 Ф50mm
IEC 60950-1 Clause 4.2.5 Enclosures Against Ingress Test Probe 1 Figure 5 Ф50mm Product information: This impact steel ball confirms to IEC 60950-1: 2013 Clause 4.2.5, IEC 60065:2014 clause 12.1.4 fig.8, 12.7.3.5, IEC 60598-1 Clause 4.13.4a, etc. The steel ball with a ring for hanging steel wire ...
IEC 60335-1 Clause 21 And Annex B.101 Tumbling Barrel Free Fall Test Apparatus
IEC 60335-1 Clause 21 And Annex B.101 Tumbling Barrel Free Fall Test Apparatus Standards & Clauses: This Tumbling Barrel Free Fall Test Apparatus conforms to the standard requirements of IEC 60068-2-32 - test procedure 2, required by required by IEC 60335-1 clause 21 and Annex B.101, IEC 60335-2-101...
IEC 61032 Figure 1 SФ50mm Test Probe A For Hazardous Parts Test
IEC 61032 Figure 1 SФ50mm Test Probe A For Hazardous Parts Test Product Overview: It conforms to the standard requirements of IEC 61032 figure 1, IEC 60529 IP1 and IEC 60065, etc. This probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify ...
IEC61032 Figure 3 Protection Verify Test Probe C For Hazardous Parts Test
IEC61032 Figure 3 Protection Verify Test Probe C For Hazardous Parts Test Product information: This probe conforms to standard requirements of IEC61032 test probe C figure 3, and required by many standards such as IEC60529 for IP3 testing, IEC 60335-1, IEC60065 and etc. This test probe C is intended ...
IEC61032 Figure 4 Protection Verify Test Probe D For Hazardous Parts Test
IEC61032 Figure 4 Protection Verify Test Probe D For Hazardous Parts Test Product information: This probe conforms to standard requirements of IEC61032 test probe D figure 4, and required by many standards such as IEC60529 for IP4 testing, IEC 60335-1, IEC60065 and etc. This test probe D is intended ...
IEC 61032 Test Probe 1 Figure 5 Ф50mm For Enclosures Against Ingress Test
IEC 61032 Test Probe 1 Figure 5 Ф50mm For Enclosures Against Ingress Test Product information: This probe conforms to standard requirements of IEC 61032 test probe 1 figure 5, and required by many standards such as IEC 60529 for IP1 testing, IEC 60335-1, IEC 60065 and etc. This test probe 1 is ...
IEC 61032 Test Probe 2 Figure 6 Ф12.5mm For Enclosures Against Ingress Test
IEC 61032 Test Probe 2 Figure 6 Ф12.5mm For Enclosures Against Ingress Test Product information: This probe conforms to standard requirements of IEC 61032 test probe 2 figure 6, and required by many standards such as IEC 60529 for IP2 testing, IEC 60335-1, IEC 60065 and etc. This test probe 2 is ...
Clause 23.3 Internal Flexible Cord Flexing Test Equipment IEC 60335-1
IEC 60335-1 Clause 23.3 Internal Flexible Cord Flexing Test Equipment Product Information:This flexibility test equipment matches the requirements of clause 23 of IEC 60335-1. It is used to conduct flexing resistance test on the electrical connections and internal wires of different parts of the ...
IEC 60335-1 Clause 30.1 Ball Pressure Test Apparatus
IEC 60335-1 Clause 30.1 Ball Pressure Test Apparatus Product information: The Ball Pressure Tester conforms to many standard requirements like IEC60335-1 Clause 30.1, IEC60884-1, IEC60950-1 and so on. It is used to test the heat resistance of external parts which and the electrical enclosure which ...
IEC 60335-1 Electrical Clearance Measuring Gauge Creepage Distance Test Cards
IEC 60335-1 Electrical Clearance Measuring Gauge Creepage Distance Test Cards Standards & Clauses: Article 27 of GB2099.1-2008 "Plugs and Sockets for Household and Similar Purposes Part 1: General Requirements" Article 23 of GB16915.1-2014 "Switches for household and similar fixed electrical ...
IEC 60335-1 Clause 23.3 Internal Wiring Flexing Test Equipment
IEC 60335-1 Clause 23.3 Internal Wiring Flexing Test Equipment Product Information: The Internal Wiring Flexing Test Equipment is designed and manufactured according to the standard requirements of Clause 23.3 of IEC 60335-1 Household and similar electrical appliances – Safety – Part 1: General ...
IEC 60335 Clause 22.11 50N Built - In Force Test Finger Nail
IEC 60335 Clause 22.11 50N Built - In Force Test Finger Nail Product Overview: The test fingernail confirms to the standard of IEC60335-1 clause 21.2, clause 22.11, Figure 7, etc. It is used to test non-detachable parts that protect against access to live parts, moisture or contact with moving parts ...
IEC60335-2 Probe With Thermometer For Surface Temperature Test
IEC60335-2 Probe With Thermometer For Surface Temperature Test Product overview: This probe conforms to the IEC 60335-2-11 Clause 11.3 Figure 101, IEC60335-2-6-2002 clause 11.101 figure 104, etc. It is mainly used to measure the temperature rise on the front surface of the easily accessible parts of ...
IEC 60335-2 Microwave Oven Testing φ190mm Cylindrical Borosilicate Glass Vessel
IEC 60335 Microwave Oven Testing φ190mm Cylindrical Borosilicate Glass Vessel Product Overview: The Ф190mm Cylindrical Borosilicate Glass Vessels conforms to the standard requirement of IEC 60335-2-25 clause 3 and 32. The φ190mm vessel is an auxiliary tool to process the normal operation testing of ...
IEC 60811 Resistance Of Insulations And Sheaths To Cracking Test Apparatus
IEC 60811 Resistance Of Insulations And Sheaths To Cracking Test Apparatus Standards & Clauses: This test apparatus complies with the standards IEC 60811-509:2012, IEC 60811-508:2012, which specifies test methods for the polymer insulation and sheathing materials of electrical distribution cables ...
IEC 61032 Figure 2 Jointed Standard Test Probe For Equipment
IEC 61032 Figure 2 Jointed Standard Test Probe For Equipment Product information: The test finger probe B is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against accessing with a finger. It complies with the standard IEC 61032 ...
IEC 60335-1 Clause 8 Non - Inductive Resister 2k Ω For Current Leakage
IEC 60335-1 Clause 8 Non - Inductive Resister 2k Ω For Current Leakage Product Information: This 2 000 Ω ± 10 % non-inductive resistor (category: wire-wound resistors) meets the requirements of IEC 60335-1 clause 8, IEC 60950-1:2013 clause 2.4.2 and etc. Used to test the leakage current between ...
IEC 60335-1 House Hold Appliance Matt Black Painted Heating Test Corner
IEC 60335-1 House Hold Appliance Matt Black Painted Heating Test Corner Product OverviewThis test corner conforms to the standard requirement of IEC 60335-1 clause 11.2, IEC60065 clause 7, etc. It is designed and manufactured to provide the required environment for the temperature rising test of all ...
IEC 60335-1 Clause 13 Touch Current Measuring Circuit Figure 4
IEC 60335-1 Clause 13 Touch Current Measuring Circuit Figure 4 Product information: This test network conforms to the measuring network requirements of IEC 60335-1 clause 13, IEC60065:2014 cl.9.1.1.2 b) and Fig.D.1 of Annex D and IEC60990 figure 4-mesuring network, touch current weighted for ...
IEC61032 Similar Test Probe B But Having A Circular Stop Face With Dia 50mm
IEC61032 Similar Test Probe B But Having A Circular Stop Face With Diam 50mm Standards & Clauses: This test probe that is similar to test probe B of IEC 61032 but having a circular stop face with a diameter of 50 mm, instead of the non-circular face, is intended to verify that the moving parts of ...
IEC 60335 Clause 22.11 Figure 7 Test Finger Nail With 50N Built - In Force
IEC 60335 clause 22.11 Figure 7 Test Finger Nail With 50N Built - In Force Product Overview: The test fingernail confirms to the standard of IEC60335-1 clause 21.2, clause 22.11, Figure 7, etc. It is used to test non-detachable parts that protect against access to live parts, moisture or contact ...
CISPR 14-1 Steel Vessels For Hotplates Test Φ110mm Φ145mm Φ180mm Φ220mm Φ300mm
CISPR 14-1 Steel Vessels For Hotplates Test Φ110mm Φ145mm Φ180mm Φ220mm Φ300mm Standards & Clauses: The vessel conforms to the standard requirements of CISPR 14-1:2016, IEC 60335-2-6:2018 figure 102, IEC60335-2-9:2016 clause 3.1.9.108 figure 104, etc. One set includes Ф110 mm, Ф145 mm, Ф180 mm, Ф210 ...
IEC 61032 Figure 2 Jointed Probe For Equipment And Persons Enclosures Protect
IEC 61032 Figure 2 Jointed Probe For Equipment And Persons Enclosures Protect Product information: The joint test probe of figure V.2 is in accordance with many standards like IEC 61032 figure 2, required by IEC 62368-1:2018 clause 5.3.2, 8.5.4.3, V.1.2 and figure V.2, IEC60884-1:2013 clause 10.1, ...
IEC60335 Three Stations Cord Flexibility Performance Test Apparatus
IEC60335 Three Station Cord Flexibility Perfomance Test Apparatus Standard & Clause: The Power Cord Flexibility Performance Tester is special designed and manufactured according to IEC60335 and according to client’s specific requirements, etc. Equipment Principle and Structure: Test sample: Cord of ...
