Toy Sharp Edge Tester for Toy Safety Compliance EN71-1 Testing Equipment Children Products Testing
| Applicable Standard: | Steel | Applied Clauses: | 10.1, 10.2, 26.6 |
| Output Test Voltage: | AC 0-62V / DC 0-62V | Power Supply: | AC 220V ±5%, 50/60Hz |
| Operating Temperature: | 0℃ – 40℃ | Relative Humidity: | ≤80% RH |
| Mandrel Diameter: | 9.53 ± 0.12 Mm | Mandrel Hardness: | Greater Than 40 HRC |
| Force Setting (Testing): | 1.35 Lbs | Applied Force: | 6 N |
| Test Type: | Sharp Edge Test | ||
| High Light: | Toy sharp edge tester EN71-1 compliant,Children product safety testing equipment,Toy compliance testing equipment with warranty |
||
- Compliant with international toy safety standards: ASTM F963 and EN71-1 Clause 8.11
- Compact and portable design for easy transportation and field testing
- Multiple operation modes including handle switch, panel switch, and foot switch
- Dual torque indication system with pointer display and pilot lamp for improved accuracy
- Quick fixing mechanism allowing the tester to be securely mounted during operation
- High-precision mandrel made of hardened steel for consistent testing performance
- Ideal for toy manufacturers, product testing laboratories, and quality inspection agencies
| Parameter | Specification |
|---|---|
| Mandrel Material | Steel |
| Mandrel Diameter | 9.53 ± 0.12 mm |
| Mandrel Hardness | Greater than 40 HRC (Rockwell C Scale) |
| Applied Force | 6 N |
| Force Setting (Testing) | 1.35 lbs |
| Test Type | Sharp Edge Test |
| Applicable Standard | EN71-1 Clause 8.11 / ASTM F963 |
| Device Dimensions | 180 mm × 120 mm × 160 mm |
- Secure the test sample firmly to ensure that the edge cannot move or bend during the test
- Apply overlapping gummed paper with a total thickness not exceeding 0.1 inch
- Position the tester so that the angle between the mandrel and the edge of the sample is 90° ± 5°
- Select the sharpest accessible edge of the sample as the testing position
- Adjust the applied force to 1.35 lbs
- After testing, measure the length of the cut on the tape using a ruler. If the cut length exceeds 0.5 inch, the edge is considered sharp and hazardous
IEC 60884-1 6-Station Socket Temperature Rise Test Equipment For Household Plug & Socket Test
IEC 60884-1 6-Station Socket Temperature Rise Test Equipment For Household Plug & Socket Test The Plug & Socket Temperature Rise Tester is a high-precision, PLC-controlled testing solution engineered to evaluate the thermal performance of household electrical accessories, including plugs, sockets, ...
IEC 60950-1 Fig NAF.2 Wedge Probe Jointed Accessibility Test Probe For Compliance Testing
IEC 60950-1 Fig NAF.2 Wedge Probe Jointed Accessibility Test Probe For Compliance Testing Professionally designed for evaluating whether hazardous parts inside slot openings or enclosure gaps of electronic and information technology equipment can be accessed by users. Product Overview This precision ...
UL 6073-2021 Clause 9.4 PV Connector Cyclic Tensile Testing Machine For Durability Testing
UL 6073-2021 Clause 9.4 PV Connector Cyclic Tensile Testing Machine For Durability Testing The PV Connector Cyclic Tensile Testing Machine fully complies with UL6073-2021 (Clause 9.4) for Connectors Used in Photovoltaic Systems. It is designed for PV connectors with cables up to 250AWG. Adopting PLC ...
IEC 61058-1 Clause 17 Switches Endurance Tester With Temperature Humidity Chamber Two Stations
IEC 61058-1 Clause 17 Switches Endurance Tester With Temperature Humidity Chamber Two Stations Product Overview The Switches Endurance Tester is designed and manufactured according to the standard requirements of IEC 61058-1 clause 17, IEC 61058-1-1 clause 17.4, and IEC 61058-1-2 clause 17.4. Test ...
