|
Product Details:
Payment & Shipping Terms:
|
| Standard Clause: | IEC60884 Clause 24.7 | Test Figure: | Figure 28 |
|---|---|---|---|
| Test Stations: | One (can Be Customized) | Abrasion Rate: | 30 Movements Per Minute |
| Test Weight: | 4N | Test Stroke: | 9mm |
| High Light: | switch endurance tester,switch life testing machine |
||
IEC 60884-1 Figure 28 Insulating Sleeves of Plug Pins Abrasion Test Apparatus
Product information:
The plug pins insulating sleeves abrasion test apparatus meets the requirements of IEC 60884-1 2013 clause 24.7 and figure 28, BS1363-1 figure 9. It is used to test the abrasion resistance strength of insulation sleeve of plug pins.
Technical parameters:
| Power Supply | AC220V, 50Hz or match the client's site local power supply |
| Test Stations | Single station (can be customized) |
| Test Times | 1-999999 (can be preset). |
| Abrasion Rate | 30 movements per minute |
| Load | 4N |
| Stroke | 9mm, about 7mm scratch on insulation sleeve |
| Steel wire | diameter 1mm, effective length 6mm |
| Conforms to standard | IEC 60884-1 2013 clause 24.7 and figure 28, BS1363-1 figure 9 |
Equipment characteristics:
Device consists of a horizontal placement of the beam and the linear movement of the fixture seat, wherein, beam ends with diameter 1mm short steel wire is bent into a U-shaped head (U shape of two vertical fixed on the beam), wire U-shaped bottom is 6mm linear part. Compress the 6mm hemline on the plug insulation sleeve, the motor drives the mounting bolt clamp seat to do reciprocating movement back and forth, conducting the abrasion test to insulation sleeve of plug pins.
Contact Person: Ms. Zoe Zou
Tel: +86 13527656435
Fax: 86-020-39185976
| Factory Address:Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China | |
| Sales office:Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China | |
| +86-020-39185976 | |
| sales@sinuotek.com | |
