Payment & Shipping Terms:
|Applied Standard:||IEC 61032||Applied Figure:||Figure 9|
|Metal Pin Tip Diameter:||Ф3mm||Metal Pin Tail Diameter:||Ф4mm|
|Handle Material:||Nylon||Handle Length:||20mm|
Figure 9 Test Probe 13,
IEC 61032 Test Probe 13
IEC 61032 Figure 9 Test Probe 13
This probe conforms to the standard requirements of IEC 61032 figure 9 test probe 13, IEC60950 figure 2B, IEC 60335-1 clause 8.1.2, etc. This pin is intended to verify the protection against access to hazardous live parts in class 0 equipment and class II equipment.
|Metal pin tip diameter (mm)||Ф3 0 -0.05|
|Metal pin tail diameter (mm)||Ф4 0 -0.05|
|Metal pin length (mm)||15 0 -0.1|
|Guard diameter (mm)||Ф25±0.2|
|Guard thickness (mm)||4|
|Handle diameter (mm)||Ф10|
|Handle length (mm)||20|
Please refer to the relevant standards.
Take IEC 60335-1 clause 8.1.2 as an example:
Test probe 13 of IEC 61032 is applied without appreciable force through openings in class 0 appliances, class II appliances and class II constructions, except for those giving access to lamp caps and live parts in socket-outlets.
The test probe doesn’t have built-in force, if specific applied force required, the test probe should work together with a force gauge. At the end of our probe handle, there is a M6 thread hole to match the force gauge. Showing as following reference picture:
Contact Person: Manager