IEC60601-1 Medical Electrical Equipment Stability Performance Tester 0-90° Inclined Platform

The Stability Test Bench SN1105-1000Q is purpose-built to satisfy IEC60601-1:2012 Medical electrical equipment — Part 1: General requirements for basic safety and essential performance. This test bench executes the stability assessment required by the IEC60601-1 clause, verifying whether ME equipment will become unbalanced or tip over when resting on inclined ground of 5° or 10°, thereby evaluating its stability performance.

• Hospital patient monitors
• Medical infusion pumps
• Medical ventilators
• Mobile medical diagnostic carts
• Portable electrocardiogram (ECG) machines
• Medical ultrasound equipment

Many generic tilt tables only offer simple angle adjustment. Our SN1105-1000Q is custom engineered strictly for IEC60601-1 medical stability testing, not a general-purpose tilt platform. The hydraulic tilting structure holds the 5° / 10° test angle steadily without drift during the full test period. The large flat loading surface accommodates heavy mobile medical equipment. The rigid welded frame avoids deflection, guaranteeing repeatable test results required for medical product certification reports.

Suitable for medical device manufacturers, third-party certification laboratories, and quality departments to complete mandatory stability verification for medical electrical equipment safety approval.

• Designed specifically for IEC60601-1:2012 basic safety & essential performance testing
• Fixed standard test angles: 5° and 10°, simulating inclined ground
• Assesses tipping / unbalance risk for ME medical electrical equipment
• Heavy-duty welded frame with anti-deflection platform for large medical devices
• Hydraulic tilting system with stable angle holding, no shifting during test
• Repeatable measurement data, directly usable for certification test reports

Perform stability performance testing for mobile medical electrical equipment including patient monitors, infusion pumps, ventilators, ECG machines, ultrasound scanners, and medical trolleys. Check whether ME equipment loses balance on a sloped floor, fulfilling mandatory IEC60601-1 safety compliance.