Payment & Shipping Terms:
|Talcum Powder Dosage:
IP6X Sand And Dust Test Chamber,
1800L Sand And Dust Test Chamber
IEC 60335-1 For Electronic Products IP5X IP6X Sand And Dust Test Chamber 1800L
The test device is suitable for sealing parts and enclosure’s sand and dust resistance capacity testing of the electrical and electronic products, car and motorcycles spare parts and seals. In order to detect the use, storage, transport performance of the electrical and electronic products, car and motorcycles spare parts and seals under the sand and dust environment.
Design a conical funnel with a dust collection port at the bottom, and install a high-pressure turbine circulation fan suction port at the dust extraction port (bottom). The dust that is pumped up is sent to the top of the inner box and is freely sprinkled from top to bottom through the top of the box, thus starting the cycle over and over again.
The sand and dust test chamber is designed and manufactured according to IEC60529 clause 13.4 IP5X and IP6X, required by IEC60598-1-2008, IEC60335-1 Clause 22.1 and etc.
|Outer size (mm)
(the height is limited due to customer’s site limitation)
|Baking dust temperature range
|Air flow speed
|Not more than 2m/s
|Talcum powder dosage
|Blowing dust method
|Air flow meter
|Metal mesh diameter
|Nominal distance between lines
|75um or below 150um
|Test time timing
|Dust blowing control cycle
|Controller control function
|(1) The dust blowing time (stop, blow) h/m/s is adjustable; (2) The cycle period is arbitrarily adjustable; (3) The preset test time: 0s~999h99m99s is arbitrarily adjustable; (4) Power-on mode: off - on - off
|Closed alloy low-noise motor, multi-blade centrifugal fan
|Control system test piece power socket
|Dustproof socket AC220V 16A
|PLC controller + touch screen
|Pressure regulating valve, suction nozzle, three-piece pressure regulating set, connecting pipe, vacuum pump
|Dust heating system
|Stainless steel mica sheet heating jacket
|Inner box material
|SUS201 stainless steel mirror panel
|Outer box material
|A3 iron plate electrostatic spraying treatment
It consists of test chamber, dust suction port, circulating dust blowing device, vacuum system, flow valve, heating system, protective screen, etc.
The bottom of the chamber will be configured with wheels and support feet, the overall chamber can be movable or can be placed stably.
|AC380V three-phase five-wire, 50Hz. Make a separate 32A air switch. The air switch must have terminal blocks. The power cord must be ≥4 square meters.
|Temperature (23±5)℃; Relative temperature 25%～70%RH; Atmospheric pressure 86～106kPa
|3KW (no load)
|Security protection system
|Phase sequence protection, leakage protection, abnormality protection, instrument over-temperature protection.
Contact Person: Ms. Zoe Zou
Tel: +86 13527656435