Payment & Shipping Terms:
|Applied Standard:||IEC 60884-1, UL498||Applied UUT:||Terminals, Connectors|
|Test Station:||Single Station||Rotation Speed:||10±2 R/min Or 9±1 R/min|
|Gyration Diameter:||75mm/76mm||Test Cycles:||0～9999 Cycles|
|Test Height:||260, 280, 300, 320mm||Bushing Hole Diameter:||6.5, 9.5, 13, 14.5mm|
IEC 60884-1 Cord Conductor Damage Degree Tester,
Cord Conductor Damage Degree Tester,
320mm Terminals Damage Degree Tester
IEC 60884-1 UL 498 Cord Conductor Damage Degree Tester New Version
Compliant with standards: IEC60884-1: 2013 Figure 11 and Table 9, UL 498. etc.
It is used to examine whether threaded terminals and non-threaded terminals can withstand the mechanical stress that occurs during normal use. It is mainly used to judge whether the design and structure of the screw clamp type terminal have reached the requirement of not excessively damaging the wire when clamping the wire.
|Rotation speed||10±2 r/min or 9±1 r/min|
|Test cycles||0～9999 cycles|
|Weights||0.3, 0.4, 0.7, 0.9, 1.4, 2kg|
|Test height||260, 280, 300, 320mm|
|Bushing hole diameter||6.5, 9.5, 13, 14.5mm|
|Applied standards||IEC 60884-1, UL 498|
Structure and function:
The new version adopt guide rail screw structure, overall is compact and practical. This apparatus integrates the 75 mm and 76mm gyration diameters, can process the related test according to IEC 60084-1 and UL 498 in one machine, which is economic.
When in use, the number of tests can be preset, and it will automatically stop when the set value is reached, accompanied by an audible alarm signal.
Contact Person: Manager