IEC 60335-2-27 Clause 22.103 Φ100mm Cylinder Rod for Emitter Protection Testing Equipment

The IEC 60335-2-27 Clause 22.103 Emitter Protection Test Probe is a specialized test probe designed for evaluating the protection of emitters used for full-body exposure or intended to be positioned over a person.

The probe simulates accidental contact or mechanical impact conditions that may occur during operation. It features a 100 mm ±1 mm diameter cylindrical probe with a hemispherical end, providing the specified contact geometry for applicable safety tests.

An M6 threaded hole is incorporated into the probe handle, allowing connection to an external force gauge or force measuring instrument for applying and monitoring specified test forces during laboratory testing.

Manufactured with a stainless steel testing head and nylon handle, the probe combines mechanical durability with convenient handling for repeated safety tests.

According to IEC 60335-2-27 Clause 22.103, this test is applicable to equipment incorporating emitters where protection against accidental damage needs evaluation.

This emitter protection test probe is used for safety testing of equipment incorporating emitters intended for full-body exposure or positioned over a person.

Typical applications include:

• Emitter protection testing
• UV equipment safety testing
• Full-body exposure equipment testing
• Phototherapy and light-emitting equipment safety evaluation
• Household and similar electrical appliance safety testing
• IEC 60335-2-27 compliance testing
• Laboratory product safety verification

Φ100 mm Test Head - The probe incorporates a 100 mm diameter cylindrical body with a hemispherical end, providing a defined contact surface for emitter protection testing.

Stainless Steel Probe - The probe head is manufactured from stainless steel, providing excellent mechanical strength and durability for repeated laboratory testing.

Nylon Handle - The handle is made from nylon, providing a lightweight and easy-to-handle structure for operators during manual testing.

M6 Force Gauge Connection - The handle incorporates an M6 threaded mounting hole, allowing connection to compatible external force gauges for controlled or monitored force application during testing.