IEC 60335-2-17 Clause 15.103 Spillage Test Apparatus For Electric Heating Pads Test
| Control System: | PLC Control | Drive System: | Stepper Motor |
| Tilt Angle: | Adjustable From 0° To 20° | Injection Speed: | 250 ML/min To 900 ML/min |
| Flow Rate: | Φ8 Mm; Length: 30 Mm | Funnel Tube: | 350X350mm |
| Distance Between Funnel: | Maximum 400 Mm | Test Point Alignment: | Laser Positioning System |
| High Light: | IEC 60335-2-17 spillage test apparatus,electric heating pads test equipment,spillage test apparatus for electrical appliances |
||
IEC 60335-2-17 Clause 15.103 Spillage Test Apparatus For Electric Heating Pads Test
Applicable Standards:
GB4706.19-2008, Clause 15.2 and Figure 101
Household and similar electrical appliances – Safety – Particular requirements for liquid heating appliances
GB/T4706.8-2024, Clause 15.103
Household and similar electrical appliances – Safety – Part 8: Heating pads, blankets, clothing and similar flexible heating appliances
GB17465.1-2009 (IEC60320-1), Clause 14.2 and Figure B.1
Appliance couplers for household and similar general purposes – Part 1: General requirements
IEC60335-2-15:2012, Clause 22.103
IEC60335-2-17:2019
IEC60320-1:2007, Clause 14.2 and Figure B.1
Test Samples & Application:
Test Samples: Cordless electric kettles, electric heating pads
Purpose: To verify that the structure of a connector with a liquid spill protection design is not affected by the ingress of liquid when properly installed in the representative base according to the manufacturer’s instructions.
Application Fields: Household appliance laboratories, quality control departments, safety certification agencies, and research institutes.
Testing Principle:
A 30 mL saline solution (1% NaCl) is poured through a funnel onto the test connector within 2 seconds.
After spillage, a dielectric strength test is performed to check insulation and electrical safety.
Technical Specifications:
| Item | Description |
|---|---|
| Model | SN1118A |
| Structure | Made of corrosion-resistant materials |
| Control System | PLC control with human–machine interface (HMI) operation |
| Drive System | Stepper motor drive with stainless steel piston water injection cylinder |
| Tilt Angle | Adjustable from 0° to 20° |
| Flow Rate Control Range | 250 mL – 900 mL |
| Injection Speed | Adjustable from 250 mL/min to 900 mL/min |
| Funnel Tube | Diameter: Φ8 mm; Length: 30 mm |
| Test Point Alignment | Laser positioning system |
| Distance Between Funnel and Sample | Maximum 400 mm |
| Sample Table Size | 350 × 350 mm (customizable) |
IEC 60335-1 Clause 22.5 Residual Voltage Tester Testing Range 5~150V Test Impedance ≥1000 MΩ
IEC 60335-1 Clause 22.5 Residual Voltage Tester Testing Range 5~150V Test impedance ≥1000 MΩ Product information: The Residual Voltage Tester is in accordance with the requirements of IEC 60335-1 Clause 22.5 (GB4706.1 Clause 22.5),IEC 60065 Clause 9.1.6 (GB8898 Clause 9.1.6), IEC 60601-1 (GB9706.1 ...
IEC 60335-2-7 Durability Test Equipment For Electric Washing Machine Doors
IEC 60335-2-7 Durability Test Equipment For Electric Washing Machine Doors SN1401 is a washing machine door and lid interlocking device durability test equipment designed for IEC 60335-2-7:2016 clause 18.101. It is used to test the reliability of the interlocking device of washing machine doors or ...
IEC 60335-1 Clause 11.2 Black Test Corner For Temperature Rising Test Corner
IEC 60335-1 clause 11.2 Black Test Corner For Temperature Rising Test Corner Product information: This test corner conforms to the standard requirement of IEC 60335-1 clause 11.2, IEC60065 clause 7, etc. It is designed and manufactured to provide the required environment for the temperature rising ...
Adjustable Temperature Rise Test Corner with 48-Point K-Thermocouple Grid IEC 60065
Adjustable Temperature Rise Test Corner with 48-Point K-Thermocouple Grid IEC 60065 Product information: The Temperature Rise Test Corner is designed and manufactured to meet the testing requirements specified in IEC 60335-1 Clause 11.2 and IEC 60065 Clause 7, among other standards. It provides a ...
