IEC 62196-1 Cable Anchorage Pull Force & Torque Test Apparatus for EV Plugs & Connectors
| Operation Method: | PLC Control | Drive Mode: | Motor And Cylinder |
| Torque Weights: | One Set | Pull Force Weights: | One Set |
| Pull Cycles: | 1-999999 Cycles | Torque Arm: | Ф200mm |
| Pull Frequency: | 1 Cycle/s | Torque Time: | 0-99H59M59S |
| High Light: | IEC 62196-1 cable anchorage test apparatus,EV plug torque test equipment,connector pull force testing device |
||
IEC 62196-1 Cable Anchorage Pull Force & Torque Test Apparatus for EV Plugs & Connectors
Product Information:
The Cable Anchorage Pull Force and Torque Test Apparatus is a professional testing machine designed for EV plugs, connectors, and socket-outlets, ensuring their ability to withstand specified pull forces and torque stresses. This equipment is manufactured in compliance with IEC 62196-1:2020 clause 25.3 Figure 17 & Table 11 and IEC 60309-1:2012 clause 23.3, making it an essential tool for electric vehicle charging system testing, quality control, and certification.
Working Principle:
Pull Force Test: Achieved through a single-phase speed-regulating motor driving an eccentric mechanism. The motor’s adjustable speed ensures accurate timing for each applied pull cycle.
Torque Test: Realized by releasing the torque weight via an air cylinder, simulating torque stress on EV connectors.
This dual-function design guarantees precise and repeatable results for both pull force endurance and torque resistance tests.
Technical Parameters:
| Operation Method | PLC control |
| Drive Mode | Motor and cylinder |
| Tension schematic diagram |  |
| Pull Force Weights |
50N, 60N, 110N, 1 each, 40N, 2 pcs, 100N, 3 pcs, can test 160N, 200N, 240N, 250N, 500N, 600N
|
| Torque Weights |
0.1 N.m, 0.15 N.m, 0.20 N.m,, 0.25 N.m, 0.3 N.m, 0.35 N.m, 0.4 N.m, 0.425 N.m, 0.6 N.m, 0.7 N.m, 1.2 N.m, 1.5 N.m, 2.3 N.m, 11.0 N.m
|
| Torque Arm | R100mm(Ф200mm) |
| Pull Frequency | 1cycle/s |
| Pull Cycles | 1-9999 cycles, can be preset, default 100 cycles |
| Torque Applied Time | 0-99H59M59S, can be preset, default 1min |
| Fixture | One set of universal fixtures |
| Equipment Dimensions & Weight | W1600*D500*H1135mm, the whole machine is about 100Kg |
| Power Supply | Single phase AC220V±10%, 60Hz, 1KW |
Key Features & Benefits:
✔ Compliant with IEC 62196-1:2020 & IEC 60309-1:2012
✔ PLC-controlled system with user-friendly interface
✔ Adjustable pull force (up to 600N) and torque (up to 11N·m) for wide applications
✔ High precision motor & cylinder system for stable, repeatable testing
✔ Universal fixture design for different EV plugs and connectors
✔ Suitable for EV charging gun manufacturers, laboratories, certification bodies
Applications:
Electric Vehicle Charging Plugs and Connectors
EV Socket-Outlets Testing
Charging Infrastructure Quality Control
Laboratory and Third-Party Certification Testing
Research & Development of EV Charging Products
IEC 62196-1 Short-Time Withstand Current Test System For EV Charging Guns & Circuit Breakers
IEC 62196-1 Short-Time Withstand Current Test System For EV Charging Guns & Circuit Breakers The Short-Time Withstand Current Test System is professional equipment for short-circuit withstand current testing of EV charging guns, circuit breakers, distribution transformers, ring main units, cable ...
UL 2594 Cla.58 EV Charging Plug Drive-Over 4893N Test Equipment
UL 2594 Cla.58 EV Charging Plug Drive-Over 4893N Test Equipment The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle, unless it is provided with a cable management system which prevents the accessory from ...
IEC 61851-1 EV Charger Pendulum Impact Test Equipment With Pendulum & Drop Hammer Test
IEC 61851-1 EV Charger Pendulum Impact Test Equipment Complete testing solution with pendulum and drop hammer impact methods for comprehensive mechanical strength evaluation. Product Overview The EV Charger IK Impact Test Equipment evaluates the mechanical strength and impact resistance of electric ...
IEC 62196-1 EV Plug Drive-Over Crushing Test Equipment For Vehicle Connector Crushing Test
IEC 62196-1 EV Plug Drive-Over Crushing Test Equipment The EV Plug Drive-Over Test Equipment is designed to evaluate the mechanical durability and safety of electric vehicle connectors and plugs under vehicle crushing conditions. This system simulates real-world scenarios where EV charging ...
