Power Cord Flexing Tester With Load Bank For Non-Rewirable Plugs And Socket-Outlets
| Work Stations: | 6 Independent Workstations | Load Current: | AC 1~40A Manually Adjustable |
| Flexing Angle: | ±10~360°, Presettable | Flexing Speed: | 0~60 Cycles/min, Presettable |
| Starting Zero Angle: | 0~±180°, Presettable | Test Weights: | 113g, 284g, 500g, 10N, 20N; 6 Sets Each |
| High Light: | power cord flexing tester,switch life tester with load bank,non-rewirable plugs tester |
||
Power Cord Flexing Tester With Load Bank For Non-Rewirable Plugs And Socket-Outlets
Product Information:
This cord flexing test apparatus is designed to perform the required flex endurance testing specified in IEC 60884-1:2022, Figure 21, Clause 23.4. It’s used to precisely evaluates the flexible cable of non-rewirable plugs and non-rewirable portable socket-outlets.
Technical parameters:
| Power Supply | Three-phase four-wire with ground, AC 380V ±10% / 50Hz |
| Workstation Load Current | 6 independent stations, AC 1–40A manually adjustable. When the preset number of open-circuit occurrences (errors) of the tested wire is reached, an alarm will sound and that station stops counting. |
| Inter-station Voltage | AC 10–300V manually adjustable. In case of short-circuit between the two poles, an alarm is triggered and the station stops counting. |
| Work stations | 6 independent workstations, each counting bending cycles separately. |
| Control System | Servo motor + PLC + color touchscreen control |
| Sample Clamp Capacity | Can hold samples with a diameter up to 20 cm |
| Flexing Angle | ±10–360°, presettable via touchscreen |
| Flexing Speed | 0–60 cycles/min, presettable via touchscreen |
| Starting Zero Angle | 0–±180°, presettable via touchscreen |
| Weights | 113g, 284g, 500g, 10N, 20N; 6 sets each |
| Cycle Count Range (Lifetime) | 0–999,999 cycles, presettable via touchscreen. Station stops and alarm triggers when reached |
| Error Count Range | 0–999, presettable via touchscreen. Station stops and alarm triggers when reached |
| Test Modes |
Mode 1: Current and inter-wire voltage output Mode 2: Current output only |
| Protection Features | Overall machine protection against over-voltage, over-current, short circuit, and leakage |
IEC 60884-1 6-Station Socket Temperature Rise Test Equipment For Household Plug & Socket Test
IEC 60884-1 6-Station Socket Temperature Rise Test Equipment For Household Plug & Socket Test The Plug & Socket Temperature Rise Tester is a high-precision, PLC-controlled testing solution engineered to evaluate the thermal performance of household electrical accessories, including plugs, sockets, ...
IEC 60950-1 Fig NAF.2 Wedge Probe Jointed Accessibility Test Probe For Compliance Testing
IEC 60950-1 Fig NAF.2 Wedge Probe Jointed Accessibility Test Probe For Compliance Testing Professionally designed for evaluating whether hazardous parts inside slot openings or enclosure gaps of electronic and information technology equipment can be accessed by users. Product Overview This precision ...
UL 6073-2021 Clause 9.4 PV Connector Cyclic Tensile Testing Machine For Durability Testing
UL 6073-2021 Clause 9.4 PV Connector Cyclic Tensile Testing Machine For Durability Testing The PV Connector Cyclic Tensile Testing Machine fully complies with UL6073-2021 (Clause 9.4) for Connectors Used in Photovoltaic Systems. It is designed for PV connectors with cables up to 250AWG. Adopting PLC ...
IEC 61058-1 Clause 17 Switches Endurance Tester With Temperature Humidity Chamber Two Stations
IEC 61058-1 Clause 17 Switches Endurance Tester With Temperature Humidity Chamber Two Stations Product Overview The Switches Endurance Tester is designed and manufactured according to the standard requirements of IEC 61058-1 clause 17, IEC 61058-1-1 clause 17.4, and IEC 61058-1-2 clause 17.4. Test ...
