IEC 60238 Figure 4 Normal Operation Test Apparatus For Screw-Type Lamp Holder Test
| Control method: | PLC Control | Operation method: | Touch Screen |
| Drive mode: | Servo Motor | Test station: | Single Station |
| Number of trials: | 0-999999 | Test speed: | 15 Times/minute |
| Torque: | 0.4, 1, 1.5, 3N.m | Lamp holder: | E14\E27\E40 |
| High Light: | Figure 4 Normal Operation Test Apparatus,IEC 60238 Normal Operation Test Apparatus |
||
IEC 60238 Figure 4 Normal Operation Test Apparatus For Screw-Type Lamp Holder Test
Product information:
Standard: IEC60238:2016
Sample and restrictions: Screw-type lamp holder.
Test purpose: Used to determine the stability and mechanical properties of the lamp holder.
Test principle: Mainly used for lamp holders that are used normally for 100 times and should not hinder continued use and should not weaken their anti-electric shock function. The electrical contact parts should not be loose, the connection between the shell and the top cover should not be loose, and the positioning screws of the threaded pipe mouth should not be loose, etc., which will cause harmful consequences.
Input power: AC220V 50Hz 0.75kW
Technical parameters:
| Control system | PLC control, touch screen operation |
| Drive mode | Servo motor + transmission mechanism |
| Test station | Single station |
| Test item | Normal screw-in and screw-out test, screw out when the set torque value is reached |
| Fixture |
The test lamp cap and lamp holder are clamped by chuck
|
| Number of trials | 0-999999, default 100 times |
| Test speed | 15 times/minute |
| Torque |
0.4, 1, 1.5, 3N.m, control servo motor output, torque sensor monitoring Torque sensor range 10N.m |
| Test lamp holder |
E14E27E40 dimensions as shown below (GB17935-2007 Figure 5)
|
| Test lamp holder physical picture |  |
| Device size | WDH=700X500X500mm |
IEC 60238 Clause 16.2 Figure 6 Torque Test Apparatus With Lamp Holder Gauge E14/E27/E40
IEC 60238 Clause 16.2 Figure 6 Torque Test Apparatus With Lamp Holder Gauge E14/E27/E40 This torque test apparatus is designed to comply with Clause 16.2 and 16.4 Figure 6 of IEC 60238:2016+A1:2017+A2:2020 standards for testing lamp holder durability and mechanical strength. Test Procedures and ...
IEC62560 Clause 15 Figure 8 Lamp Testing Equipment for Non Dimmable Lamps Compliance Test
IEC62560 Clause 15 Figure 8 Lamp Testing Equipment for Non Dimmable Lamps Compliance Test This testing equipment is specifically designed to meet the requirements of IEC 62560 Clause 15, providing a reliable and standardized solution for evaluating the performance of non-dimmable self-ballasted LED ...
IEC 62560 Clause 6 Interchangeability Gauges For E14 And E27 Lamp Cap 7006-28A-1
IEC 62560 Clause 6 Interchangeability Gauges For E14 And E27 Lamp Cap 7006-28A-1 Product Overview: Our Lamp Cap Gauges are meticulously designed to meet the dimensional and safety requirements outlined in IEC 60061-3, supporting compliance with IEC 60598-1, IEC 62560:2015, and other related lighting ...
IEC 60061-3 Lamp Cap Gauges Precision CNC Gauge Set for E26, GZ10, GX53, B15d, and E11 Testing
IEC 60061-3 Lamp Cap Gauges Precision CNC Gauge Set for E26, GZ10, GX53, B15d, and E11 Testing Product Overview: The Lamp Cap Gauges are manufactured in full compliance with IEC 60061-3, as required by IEC 60598-1, IEC 62560:2015, and related lighting standards. They are used for dimensional and ...
