logo
vr
products
PRODUCTS DETAILS
Home > Products >
IEC 61386-21 Figure 102 Gauge For Checking Minimum Inside Diameter Of Conduit System
Products

Electrical Appliance Testing Equipment

Energy Efficiency Lab

Vehicle Testing Equipment

Battery Testing Equipment

Switch Life Tester

Led Testing Equipment

Water Ingress Testing Equipment

Environmental Test Chamber

Flammability Test Chamber

EMC Test Equipment

Medical Device Testing Equipment

IEC 62368 Test Equipment

Test Equipment For Electric Lab
Contact Us
Ms. Zoe Zou
sales@sinuotek.com
86-020-39185976
Contact Now
IEC 61386-21 Figure 102 Gauge For Checking Minimum Inside Diameter Of Conduit System
  • name
  • name

IEC 61386-21 Figure 102 Gauge For Checking Minimum Inside Diameter Of Conduit System

MOQ: 1
Price: Customized
Standard Packaging: Plywood Case
Delivery Period: 30 days
Payment Method: T/T
Supply Capacity: 20 Sets Per Month
Details Information
Product Description
Detail Information
Place of Origin
China
Brand Name
Sinuo
Certification
Calibration Certificate (Cost Additional)
Model Number
SN2904
Applied Standard:
IEC 61386-21
Applied Clause:
Clause 10.4.102
Material:
Steel
Manufacturing Tolerance:
+0.05mm
Axial Dimension:
±0.2mm
Admissible Wear:
0.01mm
Highlight:

IEC 61386-21 Gauge

,

Minimum Inside Diameter Gauge

,

Conduit System Gauge

Product Description

 

IEC 61386-21 Figure 102 Gauge For Checking The Minimum Inside Diameter Of The Conduit System
 
 
Product information:
 
This gauge is the minimum inner diameter gauge for metal conduits and other materials after bending tests. When the sample is tested in IEC61386-21, clause 10.4.101 (one end of the sample is vertical and the other end is at a 45° angle to the vertical line), this gauge should pass through the sample with no initial velocity. Comply with the requirements of Clause 6.7.2 and Figure 12 of JG3050-1998 "Insulated Electrical Bushings and Accessories for Buildings", "GB 20041.21-2008 Conduit Systems for Cable Management - Special Requirements for Rigid Conduit Systems", GB/T14823.2 "Conduits for Electrical Installation" Special requirements - Rigid insulating material flat conduit", ZBG33008 "Polyvinyl chloride plastic corrugated wire conduit" and IEC61386-21 Section 10.4.101 and Figure 102 and IEC61386-22 Section 10.4.102 and Figure 102 and other requirements.
 

IEC 61386-21 Figure 102 Gauge For Checking Minimum Inside Diameter Of Conduit System 0
 
Technical parameters:
 
1. Material: steel, surface hard chromium plated
2. Gauge selection table (unit: mm)
 

No. Gauge D+0.05 0 Sample nominal diameter Minimum inner diameter of sample Remark
Minimum inner diameter gauge of metal casing after bending: IEC61386-21
1 10.2 16 12.75  
2 13.1 20 16.38  
3 16.8 25 21.0  
Minimum inner diameter gauge of non-metallic casing after bending: IEC61386-22
1 8.6 16 10.75  
2 11.3 20 14.13  
3 14.6 25 18.25  
4 19.4 32 24.25  
5 25.0 40 31.25  
6 31.7 50 39.63  
7 41 63 51.25  
Note: Tolerance of other dimensions not specified is ±0.2mm, surface wear shall not exceed 0.01mm

 
3. There are 10 gauges in total, including 3 minimum inner diameter gauges for metal casing bending and 7 minimum inner diameter gauges for non-metal casing bending.
 

IEC 61386-21 Figure 102 Gauge For Checking Minimum Inside Diameter Of Conduit System 1

 

Tags: 

switch endurance tester,  

Switch tester,  

plug socket tester

Recommended Products
IEC 60884-1 Switch Life Tester Low Energy Pendulum Impact Test Apparatus

IEC 60884-1 Switch Life Tester Low Energy Pendulum Impact Test Apparatus

Contact Now
SBL Load Bank IEC 60669-2-1 Figure 103 Load B 3 Channels 10 Loads Video

SBL Load Bank IEC 60669-2-1 Figure 103 Load B 3 Channels 10 Loads

Contact Now
IEC 61439 Low Voltage Switchgear And Controlgear Assemblies Static Load Test Bench

IEC 61439 Low Voltage Switchgear And Controlgear Assemblies Static Load Test Bench

Contact Now
IEC 60898-1 Clause 9.10 Comprehensive Test Equipment For Circuit Breaker Tripping Characteristics Video

IEC 60898-1 Clause 9.10 Comprehensive Test Equipment For Circuit Breaker Tripping Characteristics

Contact Now
IEC62262 2002 Stainless Steel Spring Hammer Test Apparatus

IEC62262 2002 Stainless Steel Spring Hammer Test Apparatus

Contact Now
Rubber Cables Flexing Test Apparatus IEC 60227.2 Figure 1 0.33m/S Video

Rubber Cables Flexing Test Apparatus IEC 60227.2 Figure 1 0.33m/S

Contact Now
Terminal Stress Tester for Screwless & Threaded Connectors UL486A-B Compliance Device

Terminal Stress Tester for Screwless & Threaded Connectors UL486A-B Compliance Device

Contact Now
IEC 60335-2-64 Similar Test Probe B But Having A Circular Stop Face With Diam 56mm

IEC 60335-2-64 Similar Test Probe B But Having A Circular Stop Face With Diam 56mm

Contact Now
IEC 60669-1 Switch Plug Socket Endurance Tester 6 Linear And Rotary Stations PLC Control Video

IEC 60669-1 Switch Plug Socket Endurance Tester 6 Linear And Rotary Stations PLC Control

Contact Now
IEC 60884-1 2022 Switches Plug And Sockets Endurance Tester With Multiple Testing Stations Video

IEC 60884-1 2022 Switches Plug And Sockets Endurance Tester With Multiple Testing Stations

Contact Now
IEC60884-1 Six Stations Switches Plug And Sockets Endurance Tester Video

IEC60884-1 Six Stations Switches Plug And Sockets Endurance Tester

Contact Now
products
PRODUCTS DETAILS
Products

Electrical Appliance Testing Equipment

Energy Efficiency Lab

Vehicle Testing Equipment

Battery Testing Equipment

Switch Life Tester

Led Testing Equipment

Water Ingress Testing Equipment

Environmental Test Chamber

Flammability Test Chamber

EMC Test Equipment

Medical Device Testing Equipment

IEC 62368 Test Equipment

Test Equipment For Electric Lab
IEC 61386-21 Figure 102 Gauge For Checking Minimum Inside Diameter Of Conduit System
  • name
  • name
IEC 61386-21 Figure 102 Gauge For Checking Minimum Inside Diameter Of Conduit System
MOQ: 1
Price: Customized
Standard Packaging: Plywood Case
Delivery Period: 30 days
Payment Method: T/T
Supply Capacity: 20 Sets Per Month
Detail Information
Product Description
Detail Information
Place of Origin
China
Brand Name
Sinuo
Certification
Calibration Certificate (Cost Additional)
Model Number
SN2904
Applied Standard:
IEC 61386-21
Applied Clause:
Clause 10.4.102
Material:
Steel
Manufacturing Tolerance:
+0.05mm
Axial Dimension:
±0.2mm
Admissible Wear:
0.01mm
Minimum Order Quantity:
1
Price:
Customized
Packaging Details:
Plywood Case
Delivery Time:
30 days
Payment Terms:
T/T
Supply Ability:
20 Sets Per Month
Highlight

IEC 61386-21 Gauge

,

Minimum Inside Diameter Gauge

,

Conduit System Gauge

Product Description

 

IEC 61386-21 Figure 102 Gauge For Checking The Minimum Inside Diameter Of The Conduit System
 
 
Product information:
 
This gauge is the minimum inner diameter gauge for metal conduits and other materials after bending tests. When the sample is tested in IEC61386-21, clause 10.4.101 (one end of the sample is vertical and the other end is at a 45° angle to the vertical line), this gauge should pass through the sample with no initial velocity. Comply with the requirements of Clause 6.7.2 and Figure 12 of JG3050-1998 "Insulated Electrical Bushings and Accessories for Buildings", "GB 20041.21-2008 Conduit Systems for Cable Management - Special Requirements for Rigid Conduit Systems", GB/T14823.2 "Conduits for Electrical Installation" Special requirements - Rigid insulating material flat conduit", ZBG33008 "Polyvinyl chloride plastic corrugated wire conduit" and IEC61386-21 Section 10.4.101 and Figure 102 and IEC61386-22 Section 10.4.102 and Figure 102 and other requirements.
 

IEC 61386-21 Figure 102 Gauge For Checking Minimum Inside Diameter Of Conduit System 0
 
Technical parameters:
 
1. Material: steel, surface hard chromium plated
2. Gauge selection table (unit: mm)
 

No. Gauge D+0.05 0 Sample nominal diameter Minimum inner diameter of sample Remark
Minimum inner diameter gauge of metal casing after bending: IEC61386-21
1 10.2 16 12.75  
2 13.1 20 16.38  
3 16.8 25 21.0  
Minimum inner diameter gauge of non-metallic casing after bending: IEC61386-22
1 8.6 16 10.75  
2 11.3 20 14.13  
3 14.6 25 18.25  
4 19.4 32 24.25  
5 25.0 40 31.25  
6 31.7 50 39.63  
7 41 63 51.25  
Note: Tolerance of other dimensions not specified is ±0.2mm, surface wear shall not exceed 0.01mm

 
3. There are 10 gauges in total, including 3 minimum inner diameter gauges for metal casing bending and 7 minimum inner diameter gauges for non-metal casing bending.
 

IEC 61386-21 Figure 102 Gauge For Checking Minimum Inside Diameter Of Conduit System 1

 

Tags: 

switch endurance tester,

Switch tester,

plug socket tester

Sinuo Testing Equipment Co. , Limited
Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China
Tel: +86 13527656435
Sitemap |  Privacy Policy | China Good Quality Electrical Appliance Testing Equipment Supplier. Copyright © 2019-2025 Sinuo Testing Equipment Co. , Limited . All Rights Reserved.