IEC 60335-2-80 Figure 102 Stainless Steel Test Pin Simulated Wear On Bolt Of Ceiling Fans
| Applied Standard: | IEC 60335-2-80 | Applied Clause: | Clause 22.102.1 |
| Applied Figure: | Figure 102 | Test Pin Material: | Stainless Steel |
| Reduced Thickness Section with Length: | At Least Equal To That Of Original Bolt | Full Thickness Section with Length: | At Least Equal To That Of Original Bolt |
| High Light: | Stainless Steel Test Pin,Ceiling Fans Test Pin,IEC 60335-2-80 Test Pin |
||
IEC 60335-2-80 Fig. 102 Ceiling Fan Test Pin Simulating Wear On The Bolt
Product information:
This stainless steel test pin meets the requirements of IEC60335 -2- 80 clause 22.102.1, figure 102.
It is simulated wear on the bolt of ceiling fans.
Technical parameter:
| Applied Standards & Clauses | IEC60335 -2- 80 clause 22.102.1, figure 102 |
| Test Pin Material | Stainless steel |
| Full Thickness Section with Length | At least equal to that of original bolt |
| Reduced Thickness Section with Length | At least equal to that of original bolt |
| Diameter of a | Same as the original bolt that connects the down rod to the motor |
| Diameter of b | 50% "a" |
The bolt that connects the down rod to the motor is replaced with the specially prepared test pin shown in Figure 102 that simulates wear on the bolt. The pin is fully inserted so that it connects the down rod to the motor.
The fan is supplied at rated voltafe and operated at maximum speed. The pin is them partially withdrawn so that the motor is connected to the down rod by that part of the pin having diameter b.
The supply to the ceiling fan shall be automatically disconnected and the fan shall not be capable of operation without replacing the worn bolt.
IEC 60335-1 Clause 22.5 Residual Voltage Tester Testing Range 5~150V Test Impedance ≥1000 MΩ
IEC 60335-1 Clause 22.5 Residual Voltage Tester Testing Range 5~150V Test impedance ≥1000 MΩ Product information: The Residual Voltage Tester is in accordance with the requirements of IEC 60335-1 Clause 22.5 (GB4706.1 Clause 22.5),IEC 60065 Clause 9.1.6 (GB8898 Clause 9.1.6), IEC 60601-1 (GB9706.1 ...
IEC 60335-2-7 Durability Test Equipment For Electric Washing Machine Doors
IEC 60335-2-7 Durability Test Equipment For Electric Washing Machine Doors SN1401 is a washing machine door and lid interlocking device durability test equipment designed for IEC 60335-2-7:2016 clause 18.101. It is used to test the reliability of the interlocking device of washing machine doors or ...
IEC 60335-1 Clause 11.2 Black Test Corner For Temperature Rising Test Corner
IEC 60335-1 clause 11.2 Black Test Corner For Temperature Rising Test Corner Product information: This test corner conforms to the standard requirement of IEC 60335-1 clause 11.2, IEC60065 clause 7, etc. It is designed and manufactured to provide the required environment for the temperature rising ...
Adjustable Temperature Rise Test Corner with 48-Point K-Thermocouple Grid IEC 60065
Adjustable Temperature Rise Test Corner with 48-Point K-Thermocouple Grid IEC 60065 Product information: The Temperature Rise Test Corner is designed and manufactured to meet the testing requirements specified in IEC 60335-1 Clause 11.2 and IEC 60065 Clause 7, among other standards. It provides a ...
