Vertical Impact Test Equipment For Resistance To Impact IEC 60079-0 Figure A.3
| Applied Standards: | IEC 60079-0：2017 | Applied Sample: | Cable Entry Device |
| Impact Energy: | E=G=mgh | Impact Height: | 100-2000mm |
| Release Method: | Electromagnet Release | Impact Element: | Φ25mm±0.05mm, 1 Kg |
| Fixture: | Pressing Block 2 Pcs | Base Plate: | Steel Plate 1000mm×1000mm |
| High Light: | A.3 Vertical Impact Test Equipment,Vertical Impact Test Equipment |
||
Vertical Impact Test Equipment Tests For Resistance To Impact IEC 60079-0 Figure A.3
Product Information:
Samples and restrictions: Cable entry devices for explosion-proof products, housings for explosion-proof products.
Test purpose: used to test the impact resistance of the cable entry device of explosion-proof products or the shell of explosion-proof products, and evaluate the impact resistance of the product.
Test principle: According to the test Ehc: vertical drop weight, the Φ25mm impact element with a weight of 1kg falls freely through the conduit at a certain height and hits the sample in the vertical direction. After the conversion of gravity potential energy into kinetic energy, the purpose of impact testing on the sample is achieved.
Equipment structure and features: beam-type frame, the hammer head is manually moved to the release position, the electromagnet releases the impact element, and the drop impact height is fixed through the conduit.
Technical Parameters:
| Impact energy/J | Calculated according to height: E=G=mgh |
| Impact element |
The front end is a hard hemisphere (Φ25mm±0.05mm), 1 kg |
| Catheter | With gap between impact element |
| Impact height | 100-2000mm, manually adjustable |
| The impact height and energy selection method is as shown in Table 15. |  |
| Structural schematic diagram | |
| Release method | Electromagnet release |
| Base plate | Steel plate 1000mm×1000mm |
| Fixture | Fixture pressing block 2 pcs |
IEC 60335-1 Clause 22.5 Residual Voltage Tester Testing Range 5~150V Test Impedance ≥1000 MΩ
IEC 60335-1 Clause 22.5 Residual Voltage Tester Testing Range 5~150V Test impedance ≥1000 MΩ Product information: The Residual Voltage Tester is in accordance with the requirements of IEC 60335-1 Clause 22.5 (GB4706.1 Clause 22.5),IEC 60065 Clause 9.1.6 (GB8898 Clause 9.1.6), IEC 60601-1 (GB9706.1 ...
IEC 60335-2-7 Durability Test Equipment For Electric Washing Machine Doors
IEC 60335-2-7 Durability Test Equipment For Electric Washing Machine Doors SN1401 is a washing machine door and lid interlocking device durability test equipment designed for IEC 60335-2-7:2016 clause 18.101. It is used to test the reliability of the interlocking device of washing machine doors or ...
IEC 60335-1 Clause 11.2 Black Test Corner For Temperature Rising Test Corner
IEC 60335-1 clause 11.2 Black Test Corner For Temperature Rising Test Corner Product information: This test corner conforms to the standard requirement of IEC 60335-1 clause 11.2, IEC60065 clause 7, etc. It is designed and manufactured to provide the required environment for the temperature rising ...
Adjustable Temperature Rise Test Corner with 48-Point K-Thermocouple Grid IEC 60065
Adjustable Temperature Rise Test Corner with 48-Point K-Thermocouple Grid IEC 60065 Product information: The Temperature Rise Test Corner is designed and manufactured to meet the testing requirements specified in IEC 60335-1 Clause 11.2 and IEC 60065 Clause 7, among other standards. It provides a ...
