|
| MOQ: | 1 |
| Price: | Customized |
| Standard Packaging: | Plywood |
| Delivery Period: | 30 Days |
| Payment Method: | L/C, T/T |
| Supply Capacity: | 20 Sets Per Month |
IEC 62196 Computer Controlled Overvoltage Test System For Electric Vehicle Accessories
Product Information:
This overpressure test system meets the test requirements of IEC 62196-3-1 Cl 101.6. It is used for pressure leakage testing of liquid coolants up to 10L volume for sealing requirements.
The system's booster pump delivers high pressure at different pressures of the sample to verify the sample's pressure resistance. The system consists of an electrical control system, a pressure control system, and a water tank, and the workpieces are installed and connected manually.
Technical Parameters:
|
Power supply |
AC 220V, 60Hz, 0.3KW |
|
Test station |
Single station |
|
Electrical control method |
Computer intelligent control and operation |
|
Test pressure |
1.0-10.0Bar, booster pump drive |
|
Pressure control accuracy |
+1% of the upper limit of the test pressure value, -1% of the lower limit |
|
Display accuracy |
0.1 Bar |
|
Test medium |
Dry air |
|
Pressure control method |
Computer control |
|
Boost rate |
Adjustable, non-uniform linear |
|
Pressure hold time |
0-9999s arbitrarily set, with seconds as the time unit, computer display |
|
Test process |
Boost-hold-relief |
|
Drive air pressure |
0.2-0.8MPa |
|
Volume size |
Less than 10L |
|
Water tank dimensions |
WDH=500×500×1000mm |
|
Standard output Interface |
ZG1/4 female thread |
|
Pressure curve display |
Real-time display, data collected by software |
|
Test data storage |
Can save reports in excel form |
|
Computer |
Intel i5 4 G RAM (or higher) 512 G solid state drive, Windows 7 operating system and OFFICE processing software with RS232 communication interface |
|
Safety protection |
|
|
Power |
Leakage protection, overload and short circuit protection |
|
Motor |
Overload, short circuit protection |
|
|
| MOQ: | 1 |
| Price: | Customized |
| Standard Packaging: | Plywood |
| Delivery Period: | 30 Days |
| Payment Method: | L/C, T/T |
| Supply Capacity: | 20 Sets Per Month |
IEC 62196 Computer Controlled Overvoltage Test System For Electric Vehicle Accessories
Product Information:
This overpressure test system meets the test requirements of IEC 62196-3-1 Cl 101.6. It is used for pressure leakage testing of liquid coolants up to 10L volume for sealing requirements.
The system's booster pump delivers high pressure at different pressures of the sample to verify the sample's pressure resistance. The system consists of an electrical control system, a pressure control system, and a water tank, and the workpieces are installed and connected manually.
Technical Parameters:
|
Power supply |
AC 220V, 60Hz, 0.3KW |
|
Test station |
Single station |
|
Electrical control method |
Computer intelligent control and operation |
|
Test pressure |
1.0-10.0Bar, booster pump drive |
|
Pressure control accuracy |
+1% of the upper limit of the test pressure value, -1% of the lower limit |
|
Display accuracy |
0.1 Bar |
|
Test medium |
Dry air |
|
Pressure control method |
Computer control |
|
Boost rate |
Adjustable, non-uniform linear |
|
Pressure hold time |
0-9999s arbitrarily set, with seconds as the time unit, computer display |
|
Test process |
Boost-hold-relief |
|
Drive air pressure |
0.2-0.8MPa |
|
Volume size |
Less than 10L |
|
Water tank dimensions |
WDH=500×500×1000mm |
|
Standard output Interface |
ZG1/4 female thread |
|
Pressure curve display |
Real-time display, data collected by software |
|
Test data storage |
Can save reports in excel form |
|
Computer |
Intel i5 4 G RAM (or higher) 512 G solid state drive, Windows 7 operating system and OFFICE processing software with RS232 communication interface |
|
Safety protection |
|
|
Power |
Leakage protection, overload and short circuit protection |
|
Motor |
Overload, short circuit protection |
