IEC 60245-1 Torvature Testing Machine 1 0.33m/S For Finished Flexible Cables
| Load Current: | 0.5~25A Adjustable | Testing Distance: | 1000±20mm |
| Load Voltage: | L-L 10~400V Adjustable | Suitable Cores: | 2-18 |
| Applied Standard: | IEC 60227.2, IEC 60245.2, Etc. | Test Station: | Single Station |
| Applied UUT: | Rubber Plastic Wires And Cables | Testing Speed: | 0.33m/S |
| High Light: | IEC 60245-1 Torvature Testing Machine,Single Station Torvature Testing Machine |
||
IEC60245-1 Torvature Testing Machine 1 0.33m/S For Finished Flexible Cables
Technical Characteristics:
|
Power Supply |
3 phase 5 wires 220VAC/ 60 Hz or 380V/50Hz |
|
Load Current |
0.5~25A, adjustable |
|
Load Voltage |
Line-to-line voltage 10~400V adjustable |
|
Testing speed |
0.33m/s |
|
Testing distance |
1000±20mm |
|
Suitable cores |
2-18 |
|
Nominal cross-sectional area |
0.2~4mm2 |
|
Diameter of pulleys |
60, 80, 120, 160, 200mm |
|
Test weights |
2*0.5kg with hook, 2*0.5kg with hole, 6*1kg with hole, 2*6kg with hook |
Equipment overview:
This test instrument can meet the test requirements of domestic and international standards and can be widely used. It has a precision digital meter, so it can accurately measure smaller or larger current voltages. The pulley replacement method is simple and convenient. The test equipment adopts chain drive mechanism with stable performance and low noise.
The tester is designed and manufactured in accordance with IEC 60227.2 Article 3.1, Figure 1, IEC 60245.2 Article 3.1, Figure 1, IEC60245-1 Article 5.6.3.1 and other standards. It meets the requirements of the relevant standards for mechanical strength bending test of rubber-plastic wires and cables. This test does not apply to flexible cables with a nominal cross-sectional area of the core greater than 4mm2 , and cables with more than 18 cores and more than two concentric layers.
How to installand adjustof the pulleys?
- Select the appropriate pulley according to the diameter of the test wire/cable and the number of wire/cable cores.
- Installation: Loosen and remove retaining nut, pull out pulley, replace pulley, install retaining nut and tighten.
- Adjustment: Release the screws of 1, 2, A, B pulleys, then adjust pulleys’ positions, to make segments of the sample are horizontal and parallel to each others. Shown as below pictures:
IEC 60884-1 6-Station Socket Temperature Rise Test Equipment For Household Plug & Socket Test
IEC 60884-1 6-Station Socket Temperature Rise Test Equipment For Household Plug & Socket Test The Plug & Socket Temperature Rise Tester is a high-precision, PLC-controlled testing solution engineered to evaluate the thermal performance of household electrical accessories, including plugs, sockets, ...
IEC 60950-1 Fig NAF.2 Wedge Probe Jointed Accessibility Test Probe For Compliance Testing
IEC 60950-1 Fig NAF.2 Wedge Probe Jointed Accessibility Test Probe For Compliance Testing Professionally designed for evaluating whether hazardous parts inside slot openings or enclosure gaps of electronic and information technology equipment can be accessed by users. Product Overview This precision ...
UL 6073-2021 Clause 9.4 PV Connector Cyclic Tensile Testing Machine For Durability Testing
UL 6073-2021 Clause 9.4 PV Connector Cyclic Tensile Testing Machine For Durability Testing The PV Connector Cyclic Tensile Testing Machine fully complies with UL6073-2021 (Clause 9.4) for Connectors Used in Photovoltaic Systems. It is designed for PV connectors with cables up to 250AWG. Adopting PLC ...
IEC 61058-1 Clause 17 Switches Endurance Tester With Temperature Humidity Chamber Two Stations
IEC 61058-1 Clause 17 Switches Endurance Tester With Temperature Humidity Chamber Two Stations Product Overview The Switches Endurance Tester is designed and manufactured according to the standard requirements of IEC 61058-1 clause 17, IEC 61058-1-1 clause 17.4, and IEC 61058-1-2 clause 17.4. Test ...
