IEC 60335-2-7 Durability Test Equipment For Electric Washing Machine Doors

IEC 60335-2-7 Durability Test Equipment For Electric Washing Machine Doors

SN1401 is a washing machine door and lid interlocking device durability test equipment designed for IEC 60335-2-7:2016 clause 18.101. It is used to test the reliability of the interlocking device of washing machine doors or lids, and to verify the opening or closing force when the interlock is actuated.

This equipment is suitable for electric tumble dryers, front-loading washing machines, and top-loading pulsator washing machines. It can also assist other repeated opening and closing tests for washing machine doors or lids during product development, quality control, and safety certification.

Applicable Standard

• IEC 60335-2-7:2016 clause 18.101

Test Applications

• Washing machine door interlocking device endurance test
• Washing machine lid interlocking device endurance test
• Door or lid opening and closing force test
• Repeated opening and closing operation for household appliance safety verification
• Reliability testing for front-loading and top-loading washing machine structures

Test Samples

• Electric tumble dryers
• Front-loading washing machines
• Top-loading pulsator washing machines
• Washing machine door or lid assemblies
• Appliance interlocking device systems

Working Principle

The on/off actions of the interlocking device are controlled by a programmed control system. The manipulators are driven by servo motors to repeatedly open and close the door or lid at a preset speed.

For door testing, the manipulator uses a vacuum suction cup to attach to the washing machine door. For lid testing, the fixture clamps the lid. A force sensor is mounted on the manipulator and forms a closed-loop control system with the servo motor, allowing accurate control of the opening or closing force value.

Main Features

• Designed for IEC 60335-2-7 clause 18.101 durability testing
• Two independent test stations for different washing machine structures
• PLC intelligent integrated control system
• 7-inch humanized touch screen operation interface
• Servo motor drive for stable and repeatable testing
• Vacuum suction cup and pneumatic clamping structure
• Adjustable door/lid opening and closing speed
• Adjustable door/lid opening and closing angle
• Opening and closing force control up to 200N
• Test cycles can be preset up to 999999 times
• Load voltage adjustable from 0 to 250V
• Auxiliary action mechanism can be customized according to sample structure
• Electrical and motor protection functions included

Technical Parameters

Equipment Structure

The equipment consists of an electrical control cabinet, load voltage regulating device, rack, and manipulator system. There are two independent test stations: one station for a drum washing machine with a front door, and one station for a pulsator washing machine with a top lid. The two workstations can conduct tests independently.

Why Choose Sinuo

Sinuo provides customized household appliance testing equipment for manufacturers, laboratories, and certification institutions. For washing machine safety testing, we can help match the test system to the customer's product structure, applicable standard, sample size, interlock type, and test cycle requirements.

If your washing machine door or lid structure is different from the standard configuration, our engineering team can review your sample drawing or test requirement and recommend a suitable fixture or auxiliary mechanism.

FAQ

What standard does the SN1401 comply with?

The SN1401 is designed according to IEC 60335-2-7:2016 clause 18.101 for washing machine door or lid interlocking device durability testing.

Can this equipment test both front-loading and top-loading washing machines?

Yes. The SN1401 has two independent stations. One is designed for a tumble washing machine with a door, and the other is designed for a pulsator washing machine with a lid.

Can the opening and closing force be controlled?

Yes. The equipment uses a force sensor and servo motor closed-loop control. The opening or closing force can be preset up to 200N.

Can the test speed and angle be adjusted?

Yes. The opening and closing speed and angle can be preset through the touch screen interface.

Can the fixture be customized?

Yes. The auxiliary action mechanism and sample fixture can be customized according to the customer's washing machine structure and test requirement.

Is this equipment suitable for certification laboratories?

Yes. It is suitable for household appliance manufacturers, quality control laboratories, and third-party testing or certification laboratories that perform IEC 60335-2-7 related tests.

Request Configuration Support

Need to test washing machine door or lid interlocking durability according to IEC 60335-2-7? Send us your test standard, sample photos, door or lid structure, and required test cycles. Our engineers will recommend a suitable SN1401 configuration for your project.