|
Product Details:
Payment & Shipping Terms:
|
| Applied Standards: | IEC60068, ASTMG155, ISO10SB02/B04, SAEJ2527, SAEJ2412 | Effective Exposure Area: | 1000cm³ |
|---|---|---|---|
| Black Board Temperature Range: | RT+30℃-80℃ | Condensation Cycle: | 40℃-60℃ |
| Material: | Stainless-steel Board | Dimension: | 950*530*540mm |
| Weight: | 93kg | Power: | 2.6KW |
| High Light: | IEC60068 Aging Test Chamber,Table Type Aging Test Chamber,Xenon Lamp Aging Test Chamber |
||
IEC60068 Table Type Xenon Lamp Simulated solar radiation Aging Test chamber
Standards & Clauses:
GB/T16422.3 -2014 / ISO 4892-3:2006 “Plastics-Methods of exposure to laboratory light sources-Part 3: Fluorescent UV lamps”
IEC60068-2-5 “Environmental testing -Part 2-5: Tests-Test Sa: Simulated solar radiation at ground level and guidance for solar radiation testing, IDT”
GBT2423.24-2013 “Environmental Testing-Part 2: Test Methods-Test Sa: Simulated solar radiation at ground level and guidance for solar radiation testing”
ASTMG155,ISO10SB02/B04,SAEJ2527,SAEJ2412
Technical Parameters:
| Applied Standards | IEC60068, ASTMG155, ISO10SB02/B04, SAEJ2527, SAEJ2412 |
| Effective exposure area | 1000cm³ |
| Black board temperature range | RT+30℃-80℃ |
| Condensation cycle | 40℃-60℃ |
| Material | Stainless-steel board |
| Dimension | 950*530*540mm |
Details
Irradiance setting range: Chinese lamps: 30W/m²~100W/m²(300nm~400nm) or 0.3W/m²~0.8W/m²(@340nm) or 0.5W/m²~1.5W/m²(@ 420nm)
Imported lamps: 30W/m²~120W/m²(300nm~400nm) or 0.3W/m²~1.0W/m²(@340nm) or 0.5W/m²~1.8W/m²(@420nm)
Product overview:
This instrument uses a UV extension filter that allows the passage of UV light below the cut-off point of natural sunlight (equivalent to sunlight without atmosphere), which simulates the full spectrum of sunlight in an optimal way, and through appropriate temperature control, to Comprehensively obtain the results of the damage of sunlight and temperature on polymer materials (material aging includes fading, loss of light, strength reduction, cracking, peeling, chalking and oxidation, etc.).
In days or weeks, this test chamber is capable of reproducing damage from months or years of outdoor environments.
It is the most economical, compact, simple, reliable and easy-to-operate xenon lamp aging test chamber, which is widely used in the estimation and evaluation of material life in paint coatings, automobiles, plastic products, wood products, rubber and other industries.
Contact Person: Ms. Zoe Zou
Tel: +86 13527656435
Fax: 86-020-39185976
| Factory Address:Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China | |
| Sales office:Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China | |
| +86-020-39185976 | |
| sales@sinuotek.com | |
