|
Product Details:
Payment & Shipping Terms:
|
| Test Standard: | IEC 62262, IEC 62208, IEC 60439 And Etc. | Equivalent Mass Of Impact Hammer: | 5kg |
|---|---|---|---|
| Pendulum Height Adjustment Range: | 0-1400mm | Swing Arm Height Adjustment Range: | 200-500mm |
| Impact Point: | Adjustable | Pendulum Hammer Head: | 5J、10J、20J、50J |
| Vertical Impact Hammer: | 5J、10J、20J | Vertical Impact Height: | 200、300、400mm |
| High Light: | 50J Pendulum Impact Test Bench,IEC 62262 Pendulum Impact Test Bench,Touch Screen Pendulum Impact Test Bench |
||
IEC 62262 Adjustable High Energy Pendulum Impact Test Bench 50J
Standards & Clauses:
IEC 62208:2011 Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements
IEC 62262:2002 Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
IEC 60439-5:2006 Low-voltage switchgear and controlgear assemblies - Part 5: Particular requirements for assemblies for power distribution in public networks
Technical Parameters:
| 1 | Equivalent mass of impact hammer | 5kg |
| 2 | Pendulum height adjustment range | 0-1400mm |
| 3 | Swing arm height adjustment range | 200-500mm |
| 4 | Impact point | adjustable |
| 5 | Pendulum hammer head | 5J,10J,20J,50J |
| 6 | Vertical impact hammer | 5J,10J,20J |
| 7 | Vertical impact release method | electromagnet release |
| 8 | Vertical impact height | 200,300,400mm |
| 9 | Security | 360°All-round safety protection, automatic electric brake to prevent secondary impact |
| 10 | Power supply | 220V/50Hz |
Product Overview
It is used to test the impact resistance of household and similar electronic and electrical products and equipment and its accessories such as plugs, sockets, surface-mounted installation boxes, screw glands, covers, switches, lamps, etc., and evaluate the safety performance and strength level of the products.
The equipment is controlled by PLC and controlled by touch screen. The height of the striking point can be adjusted by electric lifting.
The sample mounting seat is welded by 12mm steel plate and channel steel, which has the characteristics of high strength and impact resistance.
Practical structure: The device adopts an integral frame structure, which is firm and reliable.
The pendulum structure is as follows:
Contact Person: Ms. Zoe Zou
Tel: +86 13527656435
Fax: 86-020-39185976
| Factory Address:Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China | |
| Sales office:Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China | |
| +86-020-39185976 | |
| sales@sinuotek.com | |
