|
Product Details:
Payment & Shipping Terms:
|
| Applied Standard: | IEC60068-2-63: Annex A | Minimum Scale: | 0.01J |
|---|---|---|---|
| Repeat Accuracy: | ±0.01J | Range: | 0-2J，Maximum Measurable 2J |
| Outer Dimeter Of Guide Groove: | 51mm | Pendulum Energy Loss: | <0.002j |
| High Light: | Clause Annex A Calibration Device,IEC 60068-2-63 Calibration Device |
||
IEC60068-2-63 Clause Annex A Calibration Device for Spring Hammer Test Apparatus
Product Information:
The Calibration Device for Spring Hammer Test Apparatus is designed and manufactured according to the standard requirements of IEC60068-2-63:1997 Annex A, IEC60068-2-75:1997 Annex B, and etc.
The calibration principle of the spring impactor calibration device is based on the principle of energy conversion, which converts the potential energy generated by the mass and drop height of the impact element into the kinetic energy of the impact, and absorbs the energy through the pendulum as an equivalent indication.
The maximum resolution of this device is 0.02J. In the design, the release mechanism is improved to minimize the impact of vibration on the test when the spring impact hammer is released; the swing rod and bearing made of high-quality steel improve the accuracy and stability of the device.
Technical Parameters:
| Minimum Scale | 0.01J |
| Repeat Accuracy | ±0.01J |
| Range | 0-2J, Maximum measurable 2J |
| Outer Dimeter of Guide Groove | 51mm |
| Pendulum Energy Loss | <0.002j |
| Trigger Stroke | >30mm |
| Weight | Copper weight set 1piece(2J) |
Contact Person: Ms. Zoe Zou
Tel: +86 13527656435
Fax: 86-020-39185976
| Factory Address:Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China | |
| Sales office:Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China | |
| +86-020-39185976 | |
| sales@sinuotek.com | |
