|
Product Details:
Payment & Shipping Terms:
|
| Standard: | IEC 61180-1 | Clause: | 7 |
|---|---|---|---|
| Time To Half -value: | 50μs ±20％ | Warranty: | 12 Months |
| Open Circuit Output Voltage: | 12.5kV (Max) ±5％ | Front Time: | 1.2μs ±30％ |
| Usage: | Household And Similar Appliances, Information Technology Equipment, Audio And Video Electronic Equipment | Test Times: | 1-9999 Times |
| High Light: | IEC 61180-1 Generator Test Equipment,Clause 7 Generator Test Equipment |
||
What is the impulse voltage generator? How is impulse voltage generated?
Brief Introduction:
The impulse voltage generator comforms to the standards as follow.
IEC60335-1:2016
IEC60950-1:2013
IEC60065:2014 clause13.3.4,Annex J.5, Annex K.
IEC 61180-1:2016 < High-voltage test techniques for low voltage equipment - Part 1: Definitions, test and procedure requirements, test equipment> clause 7.
It is used to verify that appliances shall withstand the transient over-voltages to which thet may be subjected. The impulse voltage generator with a wave of 1.2/50ms(10/700ms) is a standard lightning wave test device. The front time of the impulse voltage is 1.2ms(10ms) ,the time to half-value is 50ms(700ms).
Techanical Parameters:
| Open Circuit Output voltage | 12.5kV (Max) ±5％ |
| Front Time | 1.2μs ±30％ |
| Time to Half -value | 50μs ±20％ |
| Output Polarity | Positive, negative, positive & negative cycling |
| Output Impedance (optional) | 12Ω±10％,500Ωis optional |
| Trigger Mode | Automatic or manual, single trigger |
| Test Times | 1-9999 times |
| Interval Time | 3-999s (3s of which is the charging time inherent in the device) |
| Main Sample | 12Ω is for power cord port; 500Ω is for material or component testing, mainly are coils |
Contact Person: Ms. Zoe Zou
Tel: +86 13527656435
Fax: 86-020-39185976
| Factory Address:Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China | |
| Sales office:Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China | |
| +86-020-39185976 | |
| sales@sinuotek.com | |
