IEC 62196-1 Insertability Test Gauges For Round Unprepared Conductors
| Applied Standard: | IEC 62196-1: 2020 | Applied Clause: | Clause 13.2.1 |
| Applied Figure: | Figure 11 | Applied Sample: | Round Unprepared Conductors |
| Material: | Steel | Quantity: | 16 Pieces |
| High Light: | IEC 62196-1 Insertability Test Gauges,Figure 11 Insertability Test Gauges |
||
IEC 62196-1 Insertability Test Gauges for Round Unprepared Conductors
Product Overview:
The gauges conform to IEC 62196-1:2014 clause 13.2.1 figure 6 table 7, IEC 62196-1:2020 clause 13.2.1 figure 11 table 2.
They are used to verify the screw type terminals shall allow the proper connection of copper or copper-alloy conductors having nominal cross-sectional areas as shown in Table 2 of IEC 62196-1:2020.
Technical parameters:
Total 16 pcs.
Made of steel, with nylon handle.
The dimensions and shapes are made according to following standard figure and table:
|
Flexible mm2 |
Rigid (solid or stranded) mm2 |
Diameter a mm |
Tolerances for a mm |
| 1.5 | 1.5 | 2.4 |
0 -0.05 |
| 2.5 | 4 | 2.8 |
0 -0.05 |
| 4 | 6 | 3.6 |
0 -0.06 |
| 6 | 10 | 4.3 |
0 -0.06 |
| 10 | - | 5.3 |
0 -0.06 |
| 16 | 25 | 6.9 |
0 -0.07 |
| 50 | 70 | 12.0 |
0 -0.08 |
| 70 | - | 14.0 |
0 -0.08 |
| - | 150 | 18.0 |
0 -0.08 |
| 150 | 185 | 20.0 |
0 -0.08 |
| 185 | 240 | 25 |
0 -0.08 |
| 240 | 300 | 28 |
0 -0.08 |
| 300 | 400 | 28.5 |
0 -0.08 |
| 400 | 500 | 33 |
0 -0.08 |
| 500 | 630 | 37 |
0 -0.08 |
| 630 | 800 | 41 |
0 -0.08 |
|
Maximum cross-section of conductors and corresponding gauges. Material: steel |
|||
IEC 62196-1 Short-Time Withstand Current Test System For EV Charging Guns & Circuit Breakers
IEC 62196-1 Short-Time Withstand Current Test System For EV Charging Guns & Circuit Breakers The Short-Time Withstand Current Test System is professional equipment for short-circuit withstand current testing of EV charging guns, circuit breakers, distribution transformers, ring main units, cable ...
UL 2594 Cla.58 EV Charging Plug Drive-Over 4893N Test Equipment
UL 2594 Cla.58 EV Charging Plug Drive-Over 4893N Test Equipment The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle, unless it is provided with a cable management system which prevents the accessory from ...
IEC 61851-1 EV Charger Pendulum Impact Test Equipment With Pendulum & Drop Hammer Test
IEC 61851-1 EV Charger Pendulum Impact Test Equipment Complete testing solution with pendulum and drop hammer impact methods for comprehensive mechanical strength evaluation. Product Overview The EV Charger IK Impact Test Equipment evaluates the mechanical strength and impact resistance of electric ...
IEC 62196-1 EV Plug Drive-Over Crushing Test Equipment For Vehicle Connector Crushing Test
IEC 62196-1 EV Plug Drive-Over Crushing Test Equipment The EV Plug Drive-Over Test Equipment is designed to evaluate the mechanical durability and safety of electric vehicle connectors and plugs under vehicle crushing conditions. This system simulates real-world scenarios where EV charging ...
