|
Product Details:
Payment & Shipping Terms:
|
| Test Station: | Single | Clamping Method: | By Rope |
|---|---|---|---|
| Test Speed: | ≤20 Drop/min | Drop Height: | 40 Mm Or 100 Mm |
| Support Plate Thickness: | >15mm | Support Plate Mass: | > 15kg |
| High Light: | electrical installation test equipment,glow wire test equipment |
||
IEC60335-2-3 Electric Irons Mechanical Strength 40mm 1000 Times Drop Test Apparatus
Standards & Clauses:
IEC60335-2-3:2015 “Household and similar electrical appliances-Safety-Part 2-3:Particular requirements for electric irons” clause 21.101
IEC60335-2-2:2016 “Household and similar electrical appliances-Safety-Part 2-2:Particular requirements for vacuum cleaners and water-suction cleaning appliances,IDT” clause 15.101
IEC60335-2-17:2015 “Household and similar electrical appliances-Safety-Part 2-17:Particular requirements for blankets,pads and similar flexible heating appliances” clause 21.101
Samples and Restrictions:
Household and similar electrical appliances such as Electric iron, control device, power cleaning head for water absorbing cleaner.
Application:
It is used to check the mechanical strength of the electric iron under normal working conditions and rated power input, and also to test the drop resistance of the electric blanket control device.
Test Principle:
The iron (except for cordless irons) is suspended by its handle with the soleplate in the horizontal position through the cam mechanism driven by servo motor. It is dropped from a height of 40 mm onto a rigidly supported steel plate having a thickness of at least 15 mm and a mass of at least 15 kg. The test is carried out 1000 times at a rate not exceeding 20 drops per min. The test is conducted so that the iron rests on the steel plate for approximately 15% of the time.
Structure:
Chamber type structure, size: about 600 × 550 × 1200 (mm) W × H × D, weight: 80kg
Use Environment:
Power supply:AC220V±10%/50-60Hz, working temperature 0-40 ° C, humidity 30%-90%
Technical Parameters:
| Model | SN1501 | SN1701 |
| Test Station | Single | Single |
| Electrical Control Method | Button control | Button control |
| Drive mode | The motor drives the cam mechanism to achieve a free drop action | The motor drives the cam mechanism to achieve a free drop action |
| Sample Clamping Method | Mounted to the drop mechanism by rope | Mounted to the drop mechanism by rope |
| Test Speed | ≤20 drop/min | ≤20 drop/min |
| Test Times | 0~9999 times, can be preset | 0~9999 times, can be preset |
| Drop Height | 40 mm, with height positioning block | 100 mm, with height positioning block |
| Support Plate | Thickness >15mm, mass > 15kg | Thickness >15mm, mass > 15kg |
| Load Power | Equipped with a universal socket, rated power input can be supplied to specimen | Equipped with a universal socket, rated power input can be supplied to specimen |
| Main Specimen | Electric iron, electric blanket control device | Power cleaning head for water suction cleaner |
| Standards Compliant | IEC60335-2-3:2015 clause 21.101 | IEC60335-2-2:2016clause 15.101 |
Contact Person: Ms. Zoe Zou
Tel: +86 13527656435
Fax: 86-020-39185976
| Factory Address:Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China | |
| Sales office:Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China | |
| +86-020-39185976 | |
| sales@sinuotek.com | |
