Payment & Shipping Terms:
|Test Station:||Single||Control Method:||Button Control|
|Drive Mode:||Pneumatic||Cord Clamping Angle:||30~70° Adjustable|
|Test Speed:||30 Times/min||Pull Stroke:||Max. 1000mm|
ac hipot test equipment,
glow wire test equipment
IEC 60335-1 Automatic Cord Reels Flexible Cord 30 times/min Pull Withdrawn Testing Equipment
Standards & Clauses:
IEC60335-1:2016 “Household and similar electrical appliances-Safety-Part1:General requirements” clause 22.16
Samples and Restrictions:
Household or similar electrical appliances with automatic cord reels, such as vacuum cleaner.
It is used to detect whether the automatic cord reels shall be constructed so that they do not cause:
-undue abrasion or damage to the sheath of the flexible cord;
-breakage of conductor strands;
-undue wear of contacts.
The large-stroke cylinder is used to pull the flexible cord out of the automatic reel mechanism to a certain length and in a direction, and then the cylinder is retracted, the flexible cord is unreeled by the automatic cord reel, this procedure is reciprocated until the preset test times are completed.
Adopts multi-functional fixture and large work surface, the test speed (5-30 times / minute) is adjustable, which suitable for most of the electrical appliances with automatic cord reels.
Equipment dimensions: about: 1200 × 800 × 1400 (mm) width × height × depth
Equipment weight: 110kg
Power supply:AC220V±10%/50-60Hz, 0.3KW; or match client's local power supply
Compressed air: 5~7kg/cm2
|Control Method||Button control|
|Sample Clamping Method||Mechanical clamping, the position of clamping point is adjustable|
|Cord Clamping Angle||30~70° is adjustable|
(the test is carried out 6000 times at a rate of approximately 30 times per minute or at the maximum rate allowed by the construction of the cord reel if this is less)
|Test Times||0~9999 time, the test is automatically stopped after the specified test times are completed|
|Pull Stroke||Max. 1000mm, adjustable|
Contact Person: Ms. Zoe Zou
Tel: +86 13527656435