EU&UL standard Auto AC Charging Gun Comprehensive Test System
| Multi-Standard: | GB, EU, And UL | Full-Automation: | One Cycle Completes All Tests |
| QR Traceability: | Built-in Scanner Links Test Results To Product ID | Wide Coverage: | Supports Single/three-phase |
| Resistance Range: | 1 – 5000 Ω, Accuracy: 1% | Thermistor Test: | 100 – 50,000 Ω, Accuracy: 2% |
| High Light: | EU UL standard AC charging gun tester,Auto charging gun test system,Electrical appliance testing equipment with warranty |
||
- Wire breakage, continuity, short circuit, and wiring sequence verification
- Main conductor continuity resistance measurement
- Built-in resistance measurement (with button pressed/unpressed states)
- Current-carrying capacity and voltage drop analysis
- Insulation resistance testing
- Dielectric withstand (hipot) testing
- Thermistor (temperature sensor) resistance measurement
| Parameter | Details |
|---|---|
| Power Supply | Single-phase AC 220V / 50Hz |
| Air Supply | 0.6 MPa |
| Control System | PLC + Industrial PC |
| Barcode/QR Code | Integrated scanner with test data traceability |
| Continuity & Wiring | PLC I/O scanning with auto pass/fail judgment |
| Built-in Resistance | Range: 1-5000 Ω, Accuracy: ±1% |
| CC & PE Resistance | Supports 16A/32A/63A AC plugs; accuracy: 1-2% |
| Thermistor Test | Range: 100-50,000 Ω, Accuracy: ±2% |
| Voltage Drop Test | Adjustable three-phase transformer: 0-380V, load 0-35A |
| Insulation Resistance | Test voltage: DC 100-1000V adjustable; lower limit: 1MΩ-1GΩ |
| Dielectric Strength | AC 0-5kV / DC 0-6kV; leakage current monitoring |
| Test Station | Single station, one product per test |
| Plug Holders | EU (vehicle & pedestal), GB, US AC holders |
| Socket Height | 750-1000 mm, ergonomic design |
| Software | Windows 7/10 compatible with data export capabilities |
| Dimensions | W 900 × D 800 × H 1800 mm |
| Weight | Approx. 300 kg |
| Mobility | Lockable casters |
| MES Connectivity | Optional (additional cost) |
• Supports multiple international standards (GB, EU, UL) in one system
• QR code-based traceability ensures complete test record linkage
• Modular test parameters and limit settings for flexible quality control
• Ready for factory integration with MES systems
IEC 62196-1 Short-Time Withstand Current Test System For EV Charging Guns & Circuit Breakers
IEC 62196-1 Short-Time Withstand Current Test System For EV Charging Guns & Circuit Breakers The Short-Time Withstand Current Test System is professional equipment for short-circuit withstand current testing of EV charging guns, circuit breakers, distribution transformers, ring main units, cable ...
UL 2594 Cla.58 EV Charging Plug Drive-Over 4893N Test Equipment
UL 2594 Cla.58 EV Charging Plug Drive-Over 4893N Test Equipment The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle, unless it is provided with a cable management system which prevents the accessory from ...
IEC 61851-1 EV Charger Pendulum Impact Test Equipment With Pendulum & Drop Hammer Test
IEC 61851-1 EV Charger Pendulum Impact Test Equipment Complete testing solution with pendulum and drop hammer impact methods for comprehensive mechanical strength evaluation. Product Overview The EV Charger IK Impact Test Equipment evaluates the mechanical strength and impact resistance of electric ...
IEC 62196-1 EV Plug Drive-Over Crushing Test Equipment For Vehicle Connector Crushing Test
IEC 62196-1 EV Plug Drive-Over Crushing Test Equipment The EV Plug Drive-Over Test Equipment is designed to evaluate the mechanical durability and safety of electric vehicle connectors and plugs under vehicle crushing conditions. This system simulates real-world scenarios where EV charging ...
