Terminal Tester IEC 62196-1 Figure 7 Screw Terminal Strength & Durability Testing Machine
| Test Station: | Single | Load Weight: | 0.4-70.3Kg |
| Rotating Diameter: | 75mm | Test Rate: | (10±2) R/min |
| Test Times: | 1-999999times | Test Height: | 260-660mm |
| Control Method: | Buttons Control | Power Supply: | AC220V, 60Hz |
| High Light: | IEC 62196-1 terminal tester,screw terminal testing machine,vehicle testing equipment with warranty |
||
Terminal Tester IEC 62196-1 Figure 7 Screw Terminal Strength & Durability Testing Machine
Product Information:
This Terminal Testing Machine is specially designed in accordance with IEC 62196-1:2022 clause 13.3.1, figure 12, and table 3. It is used to evaluate the strength, durability, and reliability of clamping screw terminals to ensure safe performance under normal operating conditions.
The equipment checks whether the screw terminal design prevents over-damage to the wire and withstands mechanical stress during normal use. With preset testing cycles, automatic stop, and alarm function, the tester provides accurate and efficient compliance testing for electrical accessories.
Key Features:
Conforms to IEC 62196-1:2022 requirements
Preset testing times (1~9999 cycles, default 150 times in 15 min)
Automatic stop with alarm when cycles are completed
Adjustable rotating weight from 0.4 to 70.3 kg
Rotating speed: (10 ± 2) r/min
Wide range of bushing hole diameters: 6.5mm to 44.5mm
Adjustable test height: 260–660mm
Robust design for long-term durability
Technical Parameters:
| Parameter | Specification |
|---|---|
| Power Supply | AC220V, 50/60Hz |
| Counting Range | 1 ~ 9999 cycles (default: 150 times / 15 min) |
| Rate of Testing | (10 ± 2) r/min |
| Rotating Weight | 0.4 ~ 70.3 kg (details per IEC table 3) |
| Rotating Diameter | 75 mm |
| Bushing Hole Diameters | 6.5, 9.5, 13, 14.5, 15.9, 19.1, 22.2, 25.4, 28.6, 31.8, 38.1, 44.5 mm |
| Adjustable Height (H) | 260 ~ 660 mm |
| Machine Dimensions (L×W×H) | 790 × 400 × 1500 mm |
The busing and mass configuring is as following table:
IEC 62196-1 Short-Time Withstand Current Test System For EV Charging Guns & Circuit Breakers
IEC 62196-1 Short-Time Withstand Current Test System For EV Charging Guns & Circuit Breakers The Short-Time Withstand Current Test System is professional equipment for short-circuit withstand current testing of EV charging guns, circuit breakers, distribution transformers, ring main units, cable ...
UL 2594 Cla.58 EV Charging Plug Drive-Over 4893N Test Equipment
UL 2594 Cla.58 EV Charging Plug Drive-Over 4893N Test Equipment The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle, unless it is provided with a cable management system which prevents the accessory from ...
IEC 61851-1 EV Charger Pendulum Impact Test Equipment With Pendulum & Drop Hammer Test
IEC 61851-1 EV Charger Pendulum Impact Test Equipment Complete testing solution with pendulum and drop hammer impact methods for comprehensive mechanical strength evaluation. Product Overview The EV Charger IK Impact Test Equipment evaluates the mechanical strength and impact resistance of electric ...
IEC 62196-1 EV Plug Drive-Over Crushing Test Equipment For Vehicle Connector Crushing Test
IEC 62196-1 EV Plug Drive-Over Crushing Test Equipment The EV Plug Drive-Over Test Equipment is designed to evaluate the mechanical durability and safety of electric vehicle connectors and plugs under vehicle crushing conditions. This system simulates real-world scenarios where EV charging ...
