IEC 61855 Figure 13-14 Hair Straightener Tension Uniformity Tester With Graph Illustrated
| Control method: | PLC Control | Drive mode: | Servo Motor Drive |
| Fixing end: | 10 Straight Line Points | Tension sensor range: | 0-50N |
| Test stroke: | 600mm | Pull direction: | Vertical |
| Clamping force: | 10N | Pull-down speed: | 5mm/s |
| High Light: | Hair Straightener Tension Uniformity Tester,IEC 61855 Hair Straightener Tension Tester |
||
IEC 61855 Figure 13-14 Hair Straightener Tension Uniformity Tester with graph illustrated
Product Information:
Standard: Conform to IEC 61855 clause 5.8, figure 13 and 14.
Specimen and restrictions: Hair straightener.
Test purpose: Used to detect the tension uniformity of the hair straightener.
Test principle: Install 10 tension sensors on the fixed end of simulated hair, use a hair straightener to pull it from the top to the bottom, measure the tension value at each point and record the comparison.
Technical Parameters:
|
|
Input power | AC220V 50HZ |
|
|
Control method | PLC intelligent integrated control, 7-inch human-machine touch interface operation |
|
|
Drive mode |
Servo motor drive |
|
|
Simulate hair fixing end |
10 straight-line distribution points, 5m apart, each point is equipped with an independent tension sensor |
|
|
Simulate hair | Nylon rope |
|
|
Tension sensor range | 0-50N, real-time monitoring, load accuracy: ±0.5%, resolution 0.01N |
|
|
Test stroke | 600mm, including fixture height |
|
|
Pull direction | Vertical |
|
|
Hair straightener clamping force | 10N, spring clamp applied |
|
|
Hair straightener pull-down speed |
5mm/s, driven and speed controlled by servo motor |
|
|
Tension collection | It is collected in real time by PLC through the tension sensor and transmitter, and each point is displayed with a tension curve. |
|
|
Sample power supply |
The equipment comes with a universal power socket and mains power |
|
|
Configuration |
Nylon rope, 1am and 2mm diameter, 20m long |
| 14. | Equipment dimensions | WDH=500x500x1100mm, 80kg |
IEC 60335-1 Clause 22.5 Residual Voltage Tester Testing Range 5~150V Test Impedance ≥1000 MΩ
IEC 60335-1 Clause 22.5 Residual Voltage Tester Testing Range 5~150V Test impedance ≥1000 MΩ Product information: The Residual Voltage Tester is in accordance with the requirements of IEC 60335-1 Clause 22.5 (GB4706.1 Clause 22.5),IEC 60065 Clause 9.1.6 (GB8898 Clause 9.1.6), IEC 60601-1 (GB9706.1 ...
IEC 60335-2-7 Durability Test Equipment For Electric Washing Machine Doors
IEC 60335-2-7 Durability Test Equipment For Electric Washing Machine Doors SN1401 is a washing machine door and lid interlocking device durability test equipment designed for IEC 60335-2-7:2016 clause 18.101. It is used to test the reliability of the interlocking device of washing machine doors or ...
IEC 60335-1 Clause 11.2 Black Test Corner For Temperature Rising Test Corner
IEC 60335-1 clause 11.2 Black Test Corner For Temperature Rising Test Corner Product information: This test corner conforms to the standard requirement of IEC 60335-1 clause 11.2, IEC60065 clause 7, etc. It is designed and manufactured to provide the required environment for the temperature rising ...
Adjustable Temperature Rise Test Corner with 48-Point K-Thermocouple Grid IEC 60065
Adjustable Temperature Rise Test Corner with 48-Point K-Thermocouple Grid IEC 60065 Product information: The Temperature Rise Test Corner is designed and manufactured to meet the testing requirements specified in IEC 60335-1 Clause 11.2 and IEC 60065 Clause 7, among other standards. It provides a ...
