Static Tension And Compression Test Device For EV Charging Gun Cable Firmness Testing
| Test station: | Single Station | Sample range: | EV Charging Gun |
| Control method: | Touch Screen Control | Test items: | Tension And Compression Test |
| Drive mode: | Motor Drive | Test rate: | 1-300mm/min |
| Constant force time: | 1-999s | Height of stroke: | 0-600mm |
| High Light: | EV Charging Gun Cable Firmness Tester,Static Tension And Compression Test Device |
||
Static Tension And Compression Test Device For EV Charging Gun Cable Firmness Testing
Application, equipment principle and structure:
It is used to test the firmness of the clamping device of the charging gun cable. It is also used for the compression test of the cable to assess whether the charging gun cable can withstand the tension and compression in normal use, and to test its mechanical strength and reliability.
The motor drive mechanism is used to perform linear pull, pressure and other actions on the sample. The pull/pressure value and constant force time can be preset through the touch screen.
The structure diagram is shown below:
Main technical parameters:
| Sample range | Charging gun |
| Test station | Single station |
| Electrical control method | Touch screen operation |
| Drive mode | Motor drive |
| Sample clamping method |
Mechanical clamping, 1. Configure 2 pc of tension clamp plates 2. Configure 1 pc of 500*500 compression plate |
| Internal dimensions of the column | WDH=600*600*1000mm |
| Height of stroke | 0-600mm |
| Test rate | 1-300mm/min can be preset |
| Constant force time | 1-999s, start timing after the force value is reached |
| Tension/Compression force | Force sensor monitoring, range 5000N, preset force value, switchable units N, kg, lb, accuracy 0.25, resolution 0.1N |
| Test items |
Charging gun tension test Charging gun compression test; |
| Equipment size and weight | Approx.: 1200×600×1800 (mm) W×D×H, Equipment weight: 220kg |
IEC 62196-1 Short-Time Withstand Current Test System For EV Charging Guns & Circuit Breakers
IEC 62196-1 Short-Time Withstand Current Test System For EV Charging Guns & Circuit Breakers The Short-Time Withstand Current Test System is professional equipment for short-circuit withstand current testing of EV charging guns, circuit breakers, distribution transformers, ring main units, cable ...
UL 2594 Cla.58 EV Charging Plug Drive-Over 4893N Test Equipment
UL 2594 Cla.58 EV Charging Plug Drive-Over 4893N Test Equipment The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle, unless it is provided with a cable management system which prevents the accessory from ...
IEC 61851-1 EV Charger Pendulum Impact Test Equipment With Pendulum & Drop Hammer Test
IEC 61851-1 EV Charger Pendulum Impact Test Equipment Complete testing solution with pendulum and drop hammer impact methods for comprehensive mechanical strength evaluation. Product Overview The EV Charger IK Impact Test Equipment evaluates the mechanical strength and impact resistance of electric ...
IEC 62196-1 EV Plug Drive-Over Crushing Test Equipment For Vehicle Connector Crushing Test
IEC 62196-1 EV Plug Drive-Over Crushing Test Equipment The EV Plug Drive-Over Test Equipment is designed to evaluate the mechanical durability and safety of electric vehicle connectors and plugs under vehicle crushing conditions. This system simulates real-world scenarios where EV charging ...
