IEC62196-1 Clause 7.11 EV Connector And Plug Breaking Capacity Test Equipment
| Test station: | Single Station | Control method: | PLC Control |
| Linear stroke: | 0-100mm | Conduction time: | 0-99.9s |
| Test frequency: | 0-10 Cycles/min | Test cycles: | 0~999999 Cycles |
| Load power: | External | Drive mode: | Servo |
| High Light: | Plug Breaking Capacity Test Equipment,IEC62196-1 Plug Breaking Capacity Test Equipment |
||
IEC62196-1 Clause 7.11 EV Connector And Plug Breaking Capacity Test Equipment
Product Information For EV Connector And Plug Breaking Capacity Test Equipment:
The Vehicle Connector and Plug Breaking Capacity test machine conforms to the standard requirements of IEC60309-1 clause 20 and clause 21, IEC62196-1 clause 7.11 and clause 7.12 and etc.
It is used to verify whether electrical accessories such as electric vehicle charging interfaces, industrial plugs, socket-outlets and couplers can withstand the mechanical, electrical and thermal stresses that occurred during normal operation without excessive wear or other harmful effects.
The servo motor drives the mechanism to make the test samples repeat insertion and withdrawal actions. An external load can be used for the breaking capacity test. The power on / off time, test speed, stroke, and angle can all be preset on the touch screen.
Technical Parameters For EV Connector And Plug Breaking Capacity Test Equipment:
| Test station | Single |
| Control method | PLC intelligent integrated control, with color humanized touch screen |
| Drive mode | Servo motor drive |
| Sample clamping method | Mechanical clamping, the position of clamping point can be adjustable along the 3-axis fixture |
| Linear stroke | 0-100mm, can be preset (the spacing between test plug and test socket≥ 50mm) |
| Conduction time | 0-99.9s, can be preset (electrical contact should be maintained no more than 4s, no less than 2s) |
| Speed of Insertion and Separation | 0-0.85m/s can be preset, default (0.8±0.1) m/s |
| Test frequency | 0-10 cycles/min, can be preset (3.75cycles/min=7.5 stoke/min) |
| Test cycles | 0~999999 cycles, can be preset |
| Load power | External, providing standard required voltage, current and power factor, the load cabinet is optional |
| Optional load cabinet | Note: only with AC load cabinet, 0-70A, voltage 0-300V |
| Test contents |
Appliance coupler/charging interface breaking capacity test Appliance coupler / charging interface normal operating life test |
| Detection function | An open circuit alarm can be realized during testing under load, and the cycles can be recorded real in time. |
| Safety protection | Ground protection, short circuit protection |
| Power Supply | Single phase AC220V±10%, 50/60Hz, 10A |
IEC 62196-1 Short-Time Withstand Current Test System For EV Charging Guns & Circuit Breakers
IEC 62196-1 Short-Time Withstand Current Test System For EV Charging Guns & Circuit Breakers The Short-Time Withstand Current Test System is professional equipment for short-circuit withstand current testing of EV charging guns, circuit breakers, distribution transformers, ring main units, cable ...
UL 2594 Cla.58 EV Charging Plug Drive-Over 4893N Test Equipment
UL 2594 Cla.58 EV Charging Plug Drive-Over 4893N Test Equipment The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle, unless it is provided with a cable management system which prevents the accessory from ...
IEC 61851-1 EV Charger Pendulum Impact Test Equipment With Pendulum & Drop Hammer Test
IEC 61851-1 EV Charger Pendulum Impact Test Equipment Complete testing solution with pendulum and drop hammer impact methods for comprehensive mechanical strength evaluation. Product Overview The EV Charger IK Impact Test Equipment evaluates the mechanical strength and impact resistance of electric ...
IEC 62196-1 EV Plug Drive-Over Crushing Test Equipment For Vehicle Connector Crushing Test
IEC 62196-1 EV Plug Drive-Over Crushing Test Equipment The EV Plug Drive-Over Test Equipment is designed to evaluate the mechanical durability and safety of electric vehicle connectors and plugs under vehicle crushing conditions. This system simulates real-world scenarios where EV charging ...
