MOQ: | 1 |
Price: | Customized |
Standard Packaging: | Case |
Delivery Period: | 1 Month |
Payment Method: | T/T |
Supply Capacity: | 20 Sets Per Month |
IEC 61851-1 Stainless Steel Test Rod Probe D Test Probe With Alligator Clip
Product overview:
This rod probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access with a wire.
Applicable standard
This probe conforms to the standard requirement of IEC61032 figure 4 test probe D, it is required by IEC 61851-1 clause 8 and 12.4, IEC 60335-1 clause 22.1, IEC60529 for IP4, IEC60065 and etc.
Customizable
It can be used for anti-electric shock test when equipped with alligator clip. Or used for enclosure protection test when open threaded hole of M6 at the end of the handle (connected with a pull and push force gauge). The probe whose model number with "T" is with built in force.
Technical parameters:
Model | SN2210-4 | SN2210-4T (Optional) |
Name | Test rod probe D | Test rod probe D with force |
Test Wire Diameter | Ф1+0.05 0 (mm) | Ф1+0.05 0 (mm) |
Stop Face Diameter | SФ35±0.2 (mm) | SФ35±0.2 (mm) |
Handle Diameter | Ф10 (mm) | Ф10 (mm) |
Test Wire Length | 100±0.2 (mm) | 100±0.2 (mm) |
Handle Length | 100 (mm) | ---- |
Built-in Force | N/A | 3N force |
MOQ: | 1 |
Price: | Customized |
Standard Packaging: | Case |
Delivery Period: | 1 Month |
Payment Method: | T/T |
Supply Capacity: | 20 Sets Per Month |
IEC 61851-1 Stainless Steel Test Rod Probe D Test Probe With Alligator Clip
Product overview:
This rod probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access with a wire.
Applicable standard
This probe conforms to the standard requirement of IEC61032 figure 4 test probe D, it is required by IEC 61851-1 clause 8 and 12.4, IEC 60335-1 clause 22.1, IEC60529 for IP4, IEC60065 and etc.
Customizable
It can be used for anti-electric shock test when equipped with alligator clip. Or used for enclosure protection test when open threaded hole of M6 at the end of the handle (connected with a pull and push force gauge). The probe whose model number with "T" is with built in force.
Technical parameters:
Model | SN2210-4 | SN2210-4T (Optional) |
Name | Test rod probe D | Test rod probe D with force |
Test Wire Diameter | Ф1+0.05 0 (mm) | Ф1+0.05 0 (mm) |
Stop Face Diameter | SФ35±0.2 (mm) | SФ35±0.2 (mm) |
Handle Diameter | Ф10 (mm) | Ф10 (mm) |
Test Wire Length | 100±0.2 (mm) | 100±0.2 (mm) |
Handle Length | 100 (mm) | ---- |
Built-in Force | N/A | 3N force |