|
Product Details:
Payment & Shipping Terms:
|
| Applied Standard: | IEC60309-1: 2012 | Applied Clause: | Clause 24.2 |
|---|---|---|---|
| Applied Figure: | Figure 7 | Impact Energy: | 1～6J |
| Hammer Anvil: | Ф50mm | Impact Angle: | 25°, 35°, 36°, 42°, 47°, 52° |
| Pendulum Material: | Steel Pipe | Pendulum Length: | 1M |
| High Light: | IEC60309-1 Strength Impact Test Apparatus,Figure 7 Strength Impact Test Apparatus,Mechanical Strength Impact Test Apparatus |
||
IEC60309-1 Green Car Accessories Mechanical Strength Impact Test Apparatus
| Operation Method | Manual operation |
| Impact Weight | 50*16mm; 304# stainless steel 0.25Kg impact weights |
| Combined Impact Weight | 0.5Kg (low energy) (2 pieces of 0.25Kg weights), |
| Impact Energy | 1～6J (The impact weights can be interchangeable) |
| Hammer Anvil | Ф50 mm |
| Impact Angle | 25°, 35°, 36°, 42°, 47°, 52° |
| Pendulum Support Structure | Can move back and forth, left and right, up and do and can rotate 90° |
| Pendulum Material | Steel pipe with outer diameter of 10 mm and wall thickness of 1.0 mm |
| Pendulum Length | 1m, from the pivot to the center of the impact element |
| Mounting Plate | 8mm thick stainless-steel plate, made according to the customer's specified aperture and position, default one set |
| Impact Height | 776mm, 833mm |
| Vertical Backboard Material | Plywood |
| X/Y/Z Axis Stroke | Movable range is greater than 300 mm |
Counterweight and impact energy:
Choose the counterweight and drop angle according to the impact energy. If the impact energy is ≤2J, add two counterweights at the upper hole position and with one weight on each side, the total mass is 0.5kg; if the impact energy is >2J, add two more counterweights at the lower hole position and with two weights on each side, the total mass is 1Kg.
Counterweights of the impact energy and the impact angle are shown in following Table:
| Impact energy(J) | Counterweights(Kg) | Release angle |
| 1 | 0.5 | 25° |
| 2 | 0.5 | 35° |
| 3 | 1 | 36° |
| 4 | 1 | 42° |
| 5 | 1 | 47° |
| 6 | 1 | 52° |
Contact Person: Ms. Zoe Zou
Tel: +86 13527656435
Fax: 86-020-39185976
| Factory Address:Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China | |
| Sales office:Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China | |
| +86-020-39185976 | |
| sales@sinuotek.com | |
