automotive test equipment
"
6 M³ Walk-in Sand & Dust Test Chamber IP Dust Protection Testing
6 M Walk-in Sand & Dust Test Chamber IP Dust Protection Testing Product information: This equipment complies with the test requirements specified in GB2423.37-2006 (Environmental Testing for Electric and Electronic Products Part 2: Test Methods Test L: Sand and Dust Test, Test Lb). Product Features: 1. The equipment adopts a walk-in modular structure. Inside the chamber, each of the four corners has a funnel, and the middle section uses a rotating dust brush mechanism,
Battery Mechanical Shock Test System Half-Sine Sawtooth Square Wave Shock Tests
Battery Mechanical Shock Test System Half-Sine Sawtooth Square Wave Shock Tests Product Information: This mechanical shock tester is mainly suitable for shock resistance tests in the fields of electronic products, aerospace, shipbuilding, defense sectors, automotive parts, transportation, etc. By selecting different waveform generators, half-sine wave, post-peak sawtooth wave or square wave Shock tests can be performed. The system meets industry testing standards such as GB
Water Cooled Xenon Arc Lighting Test Chamber Spectral Irradiance 0.3W/M2～1.1 W/M2
High Accuracy Water-cooled Xenon-arc Lighting Test Chamber Product information: This water cooling xenon weathering test chamber is designed according to ISO10SB02/B04, ASTMG155, ect. It is required by various standards requirements such as IEC 62368-1:2018 clause Y.2 and Annex C, etc. It is with imported Q-LAB water-cooled xenon-arc lamp, spectral irradiance 0.3W/m21.1 W/m2 (@340nm), together with other imported high quality components, the chambers quality is much higher
IEC 62368-1 Programmable Heating Oven For Accelerated Aging Tests Thermal Aging Chamber
IEC 62368-1 Programmable Heating Oven For Accelerated Aging Tests Thermal Aging Chamber Product information: This equipment has the characteristics of rapid heating, precise temperature control, adjustable air volume and so on. It has eight core technologies: microcomputer control, over-temperature alarm, internal circulation blast, multi-purpose machine, stainless steel inner tank, thick insulation layer, multi-capacity, constant temperature timing. Application fields:
Surge Test Generator Simulate Electrical Surges Or Transients Test Electronic IEC 60950-1
Surge Test Generator Simulate Electrical Surges Or Transients Test Electronic IEC 60950-1 Product Information: This surge test generator conforms to IEC 62368-1:2018 clause 5.4.2, 5.5.8 and Annex D, circuit 3 of Table D.1, Annex G.10, etc., IEC 60950-1:2013 clause 7.4.2, reference 3 of table N.1, IEC60065:2014 clause 10.2, 13.3.4 a). 7-inch touch LCD interface, rich in functions, easy to operate, easy to upgrade software Intelligent programmable high voltage power supply,
IEC 60950-1 Clause 4.2.5 Steel Ball Impact Test Device Drop Weight Impact Tester
IEC 60950-1 Clause 4.2.5 Steel Ball Impact Test Device Drop Weight Impact Tester Product Information: Standard: According to IEC60950-1:2005 clause 4.2.5, IEC60598-1:2014 clause 4.13.4a, IEC60065:2005 clause 12.1.3 and figure 8. Samples and restrictions: Information technology equipment, lighting. Application: Conduct drop and impact performance tests on equipment casings. Test principle: Free vertical drop or free swing impact sample. Structure and features: The equipment
Hydraulic Vertical Shock Test System With Half-Sine Waveform Generator
Hydraulic Vertical Shock Test System with Half-Sine Waveform Generator Product Information: This machine is mainly suitable for shock tests in the fields of electronic products, aerospace, ships, military industry, automotive parts, transportation, etc. By selecting different waveform generators, shock tests such as half-sine wave, post-peak sawtooth wave or square wave can be performed. The equipment meets the test specifications of MIL-STD-202F, IEC-68-2-27, MIL-STD-810F,
Clause Y.2 And Annex C Water Cooled Xenon Weathering Test Chamber IEC 62368-1
IEC 62368-1 Clause Y.2 and Annex C Water-Cooled Xenon Weathering Test Chamber Product Information: This Water-Cooled Xenon Weathering Test Chamber is designed and manufactured according to the standard requirements of IEC 62368-1:2018 clause Y.2 and Annex C, etc. It is with imported Q-LAB water-cooled xenon-arc lamp, spectral irradiance 0.3W/m21.1 W/m2 (@340nm), together with other imported high quality components, the chambers quality is much higher than other versions of
IPX5 IPX6 Water Jet Test System For Waterproof Rating IEC 60529
IPX5 IPX6 Water Jet Test System For Waterproof Rating IEC 60529 Product Overview: Fully conforms to IEC 60529:2013, specifically IPX5 and IPX6 degrees of protection against water ingress for enclosures. The device is a high-precision water jet testing system designed to verify the waterproof performance of a wide range of products under controlled spray conditions. It simulates strong water jet impact from all directions to ensure compliance with IPX5/IPX6 requirements.
