automotive test equipment
"
Damp Heat Climatic Environmental Test Chamber 150℃ Programmable Constant Temperature / Humidity Test Chamber
Constant Temperature and Humidity Testing Equipment Damp Heat Environmental Test Chamber Standards & Clauses: IEC60068-2-1:2007 Environmental Testing-Part 2-1:Tests-Test A:Cold,IDT IEC60068-2-2:2007 Environmental Testing-Part 2-1:Tests- Test B-Dry heat,IDT IEC60068-2-78:2012 Environmental Testing-Part 2-78:Tests-Test Cab: Damp heat,steady state,IDT IEC60068-2-30:2005 Environmental Testing-Part 2-30:Tests-Test Db: Damp heat,cyclic(12h+12h cycle),IDT Samples and
IEC 62196-1 Vehicle Plugs Connectors Thermal Cycling Test Chamber -40°C To 125°C
IEC 62196-1 Vehicle Plugs Connectors Thermal Cycling Test Chamber IEC 62196-1 Vehicle Plugs Connectors Thermal Cycling Test Chamber -40C to 125C Product information: This thermal shock test chamber is required by IEC 60068-2-14 (Test Na) and it is required by IEC 62196-1Ed.4CDV 2020 clause 34.3. The hot and cold impact (thermal shock) test chamber is used to test whether the rapid changes in high and low temperatures cause adverse effects on the product. It is a necessary
IEC 60068-2-75 IK Code High Energy Pendulum Impact Test Apparatus Plug And Socket Test
IEC 60068-2-75 IK Code High Energy Pendulum Impact Test Apparatus Plug And Socket Test Equipment information: The high energy pendulum impact test apparatus is designed and manufactured according to the requirements of IEC60068-2-75, IEC60884-1:2013, IEC62262:2002 clause 6, etc. It is used for the impact resistance test of household and similar electronic and electrical products and their accessories such as plugs and sockets and wall mounted mounting boxes, screw glands,
SAE J400 Gravel Impact Resistance Testing Machine For Automotive Surface Coatings Testing
SAE J400 Gravel Impact Resistance Testing Machine For Automotive Surface Coatings Testing Product information: Standard: SAE J400 "Testing for the resistance of automotive surface coatings to gravel ", ISO 20567-1 "Determination of the resistance of paint and varnish coatings to gravel Part 1: Multiple impact test", DIN 55996-1:2001 "Testing the resistance of coating materials to gravel Part 1: Multiple impact test" ASTM D3170-03(2007) GME 60268-96 GMW14700 GM9508P
IEC62196-1 Charging Interface Vehicle Rolling Test Machine
IEC62196-1:2014 Charging interface vehicle rolling test machine Equipment Introduction: This equipment puts the power supply plug and the vehicle plug with the cable recommended by the manufacturer on the concrete floor randomly, and applies (5000250)N or (11000N550)N to the car tires of the same load with the specification of P225/75R15. The pressure is rolled over the charging plug or plug function box (tire inflation pressure 2.20.1) Pa at a speed of (82)km/h to
ISO 4892-1/2 Water-Cooled Xenon Weathering Test Chamber Irradiance Range 0.3W/M2～1.1 W/M2
ISO 4892-1/2 Water-Cooled Xenon Weathering Test Chamber Irradiance Range 0.3W/M21.1 W/M2 Product information: This water-cooling xenon weathering test chamber conforms to ISO 4892-1,2, etc. It is with imported Q-LAB water-cooled xenon-arc lamp, spectral irradiance 0.3W/m21.1 W/m2 (@340nm), together with other imported high quality components, the chambers quality is much higher than other versions of xenon weathering test chambers in the markets. Weathering test is an
IEC 60335-1 Needle Flame Test Apparatus For Test Flammability And Fire Resistance Of Materials
IEC 60335-1 Needle Flame Test Apparatus For Test Flammability And Fire Resistance Of Materials Product overview: The Needle Flame Tester consists of a 0.9mm needle-shaped burner that tilts with the angel of 45and provide it with butane gas. The fire hazard of the equipment when there is flammule inside the equipment that caused due to the fault condition is assessed by whether the specimen can be ignited or the combustion time and length. This tester conforms to the
IEC 60529 IPX1~2 Waterproof Vertical Dripping Testing Apparatus 1000L Test Electronic Products
IEC 60529 IPX1~2 Waterproof Vertical Dripping Testing Apparatus 1000L Test Electronic Products Product Information: The equipment is designed and manufactured according to requirements of IEC 60529: 2013 IPX1, IPX2. It is used for testing electronic and electrical products, lamps, electric cabinets, electrical components, automobiles, motorcycles and their parts and components physical and other related properties under simulated climatic conditions. After the test, it is
IEC 60068-2-68 Sand And Dust Test Chamber For Automotive & Electronic IP Protection Testing
IEC 60068-2-68 Sand and Dust Test Chamber for Automotive & Electronic IP Protection Testing Product information: Conforms to IEC60068-2-68-La2, ISO20653-La2, IEC60529, etc. This equipment is suitable for testing electrical and electronic products, automobile and motorcycle parts, and seals to prevent sand and dust from entering the seals and shells in a sand and dust environment. It is used to test the performance of electronic and electrical products, automobile and
