Lighting Adjustment Test Apparatus For Lamp Adjustment Torsion And Bending Test IEC 60598-1
| Test Station: | One Station | Operation Mode: | PLC Control |
| Test Speed: | 0 To 60 Times/min | Rotation Angle: | 0~360° (0~±180°) |
| Rotation Center Height: | 1200mm | Test Cycles: | 1~999999, Can Be Preset |
| Power Supply: | AC230V, 60HZ | Drive method: | Servo Motor |
| High Light: | Bending Lighting Adjustment Test Apparatus,Lamp Adjustment Lighting Adjustment Test Apparatus |
||
Lighting Adjustment Test Apparatus For Lamp adjustment Torsion And Bending Test IEC 60598-1
Product information:
This lighting adjustment test equipment matches the requirements of clause 4.14.3 of IEC 60598-1, mainly used for the lamp adjustment device’s torsion, and bending test of the table lamps, floor lamps and the lamps which are for professional use (such as a plotter lamps).
The test equipment is coming with integrated PLC & touch screen, motor drive bending mechanism, sample installation platform. The bending angles, test speed and test cycle can be set on touch screen. Once the test is completed or failed, the test equipment will give out signal.
Technical parameters:
| Power Supply | AC230V, 60Hz |
| Bending /Rotation Angle | 0~360° (or 0~±180°) can be preset on touch screen |
| Test Speed | 0 to 60 times / min, can be preset |
| Test Cycles | 1~999999 can be preset |
| Electrical Control | PLC & 7” touch screen |
| Drive Mode | Stepper motor |
| Operation Mode | Intelligent touch screen control (7 inches) |
| Rotation Center Height | 1200mm |
| Platform Liftable Stroke | 0-1000mm, manually adjustable by rotating the hand wheel |
| Maximum Radius of Gyration of the Rotating Fixture | R500mm |
| Test Station | One station |
IEC 60238 Clause 16.2 Figure 6 Torque Test Apparatus With Lamp Holder Gauge E14/E27/E40
IEC 60238 Clause 16.2 Figure 6 Torque Test Apparatus With Lamp Holder Gauge E14/E27/E40 This torque test apparatus is designed to comply with Clause 16.2 and 16.4 Figure 6 of IEC 60238:2016+A1:2017+A2:2020 standards for testing lamp holder durability and mechanical strength. Test Procedures and ...
IEC62560 Clause 15 Figure 8 Lamp Testing Equipment for Non Dimmable Lamps Compliance Test
IEC62560 Clause 15 Figure 8 Lamp Testing Equipment for Non Dimmable Lamps Compliance Test This testing equipment is specifically designed to meet the requirements of IEC 62560 Clause 15, providing a reliable and standardized solution for evaluating the performance of non-dimmable self-ballasted LED ...
IEC 62560 Clause 6 Interchangeability Gauges For E14 And E27 Lamp Cap 7006-28A-1
IEC 62560 Clause 6 Interchangeability Gauges For E14 And E27 Lamp Cap 7006-28A-1 Product Overview: Our Lamp Cap Gauges are meticulously designed to meet the dimensional and safety requirements outlined in IEC 60061-3, supporting compliance with IEC 60598-1, IEC 62560:2015, and other related lighting ...
IEC 60061-3 Lamp Cap Gauges Precision CNC Gauge Set for E26, GZ10, GX53, B15d, and E11 Testing
IEC 60061-3 Lamp Cap Gauges Precision CNC Gauge Set for E26, GZ10, GX53, B15d, and E11 Testing Product Overview: The Lamp Cap Gauges are manufactured in full compliance with IEC 60061-3, as required by IEC 60598-1, IEC 62560:2015, and related lighting standards. They are used for dimensional and ...
