IEC 60598-1 Electro-Mechanical Contact Test System With Load Cabinet For Lamp Live Test
| Test cycle time: | 0 To 99 Seconds | Counter: | 0~9999 Times Can Be Preset |
| Work station: | Single Station | On time: | 0~99.9 Seconds |
| Gas source: | 6 ~ 8gk / Cm2 | Power supply: | AC 230V /2A/60Hz |
| Load output current: | AC 5 ~ 30A | Load output voltage: | AC 0 ~ 250V |
| High Light: | IEC 60598-1 Contact Test System,Electro-Mechanical Contact Test System |
||
IEC 60598-1 Electro-Mechanical Contact Test System With Load Cabinet For Lamp Live Test
Product Information:
The tester is designed and manufactured according to the standard requirements of IEC60598-1 clause 4.11.6 and figure 31. The test machine is connected to the power load cabinet during the test, and the live test is performed. After the mechanical number test is completed, the voltage drop test can be directly switched. Can set the number of on/off times, test voltage, current and load power factors, etc.
Technical Parameters:
1. Working power supply: AC 230V /2A/60Hz;
2. Gas source: 6 ~ 8gk / cm2;
3. On time: 0~99.9 seconds (minutes) adjustable;
4. Test on-off mode: with intelligent control system, can be connected to the load separately, segmented control;
5. It can realize two ways of electrical opening and closing and mechanical opening and closing;
6. Intelligent discriminating function: When the sample is glued, continuous on or off occurs, it can alarm when the number of times is set;
7. Test cycle time: adjustable from 0 to 99 seconds;
8. Counter: 0~9999 times can be preset;
9. Work station: single station;
10. Load output mode: resistive + inductive load;
11. Load output current: AC 5 ~ 30A continuously adjustable;
12. Load output voltage: AC 0 ~ 250V continuously adjustable;
13. Power factor: 0.3~1.0 continuously adjustable;
14. Accuracy: V: 0.5, I: 0.5, COSΦ: 0.03;
15. Counter: 0~99999 times can be preset;
16. Machine size: 950 × 1200 × 1850mm (W * D * H).
IEC 60238 Clause 16.2 Figure 6 Torque Test Apparatus With Lamp Holder Gauge E14/E27/E40
IEC 60238 Clause 16.2 Figure 6 Torque Test Apparatus With Lamp Holder Gauge E14/E27/E40 This torque test apparatus is designed to comply with Clause 16.2 and 16.4 Figure 6 of IEC 60238:2016+A1:2017+A2:2020 standards for testing lamp holder durability and mechanical strength. Test Procedures and ...
IEC62560 Clause 15 Figure 8 Lamp Testing Equipment for Non Dimmable Lamps Compliance Test
IEC62560 Clause 15 Figure 8 Lamp Testing Equipment for Non Dimmable Lamps Compliance Test This testing equipment is specifically designed to meet the requirements of IEC 62560 Clause 15, providing a reliable and standardized solution for evaluating the performance of non-dimmable self-ballasted LED ...
IEC 62560 Clause 6 Interchangeability Gauges For E14 And E27 Lamp Cap 7006-28A-1
IEC 62560 Clause 6 Interchangeability Gauges For E14 And E27 Lamp Cap 7006-28A-1 Product Overview: Our Lamp Cap Gauges are meticulously designed to meet the dimensional and safety requirements outlined in IEC 60061-3, supporting compliance with IEC 60598-1, IEC 62560:2015, and other related lighting ...
IEC 60061-3 Lamp Cap Gauges Precision CNC Gauge Set for E26, GZ10, GX53, B15d, and E11 Testing
IEC 60061-3 Lamp Cap Gauges Precision CNC Gauge Set for E26, GZ10, GX53, B15d, and E11 Testing Product Overview: The Lamp Cap Gauges are manufactured in full compliance with IEC 60061-3, as required by IEC 60598-1, IEC 62560:2015, and related lighting standards. They are used for dimensional and ...
