Luminaries Fluorescent Lamp Holder Axial Force Test Device IEC 60598-1
| Power supply: | AC 220V ; 50Hz | Axial force: | 15N, 30N |
| Specimen range: | 0-250mm | Fixtures: | V-type Fixture |
| Brand: | Sinuo | Warranty: | One Year |
| High Light: | Lamp Holder Axial Force Test Device,IEC 60598-1 Axial Force Test Device,30N Led Testing Equipment |
||
Luminaries Fluorescent Lamp Holder Axial Force Test Device IEC 60598-1
Applied Standards For Fluorescent Lamp Holder Axial Force Test Device:
The test equipment is designed and manufactured according to IEC60598-1 clause 4.4.4
Product Overview For Fluorescent Lamp Holder Axial Force Test Device:
It is applicable to axial pressure is applied to the G5 lamp holder of 15N, 30N axial pressure exerted on the G13 lamp holders, pressure holding time 1 minutes then quit, deformation detection lamp holder shall not exceed the amount of light foot length of 1 / 4.
Technical Parameters For Fluorescent Lamp Holder Axial Force Test Device:
| Power | 220V 50Hz |
| The axial force | 15N (bar weight), 30N (superimposed by a 15N vias weight onto the bar) |
| Fixtures | V-type fixture, front and back adjustable,G5 7006-47C;G13 7006-60C |
| Holding specimen height range | 0-250mm |
IEC 60238 Clause 16.2 Figure 6 Torque Test Apparatus With Lamp Holder Gauge E14/E27/E40
IEC 60238 Clause 16.2 Figure 6 Torque Test Apparatus With Lamp Holder Gauge E14/E27/E40 This torque test apparatus is designed to comply with Clause 16.2 and 16.4 Figure 6 of IEC 60238:2016+A1:2017+A2:2020 standards for testing lamp holder durability and mechanical strength. Test Procedures and ...
IEC62560 Clause 15 Figure 8 Lamp Testing Equipment for Non Dimmable Lamps Compliance Test
IEC62560 Clause 15 Figure 8 Lamp Testing Equipment for Non Dimmable Lamps Compliance Test This testing equipment is specifically designed to meet the requirements of IEC 62560 Clause 15, providing a reliable and standardized solution for evaluating the performance of non-dimmable self-ballasted LED ...
IEC 62560 Clause 6 Interchangeability Gauges For E14 And E27 Lamp Cap 7006-28A-1
IEC 62560 Clause 6 Interchangeability Gauges For E14 And E27 Lamp Cap 7006-28A-1 Product Overview: Our Lamp Cap Gauges are meticulously designed to meet the dimensional and safety requirements outlined in IEC 60061-3, supporting compliance with IEC 60598-1, IEC 62560:2015, and other related lighting ...
IEC 60061-3 Lamp Cap Gauges Precision CNC Gauge Set for E26, GZ10, GX53, B15d, and E11 Testing
IEC 60061-3 Lamp Cap Gauges Precision CNC Gauge Set for E26, GZ10, GX53, B15d, and E11 Testing Product Overview: The Lamp Cap Gauges are manufactured in full compliance with IEC 60061-3, as required by IEC 60598-1, IEC 62560:2015, and related lighting standards. They are used for dimensional and ...
