Lamp Holders Rotational Torque Test Apparatus For Screwed Luminaires IEC 60598-1
| Standards: | IEC 60598-1:2014 | Clause: | 4.12.4 |
| Torque Display: | Digital Display | Test Samples: | Lampholders |
| Samples: | E10, E14, E27, Ect. | Test Time: | 1 Min |
| Torque Range: | 0-10N.m | Warranty: | 1 Year |
| High Light: | Lamp Holders Rotational Torque Test Apparatus,IEC 60598-1 Torque Test Apparatus,Screwed Luminaires Torque Test Apparatus |
||
Lamp Holders Rotational Torque Test Apparatus For Screwed Luminaires IEC 60598-1
Standards For Lamp Holders Rotational Torque Test Apparatus:
IEC 60598-1:2014 “Luminaries-Part1: General requirements and tests” clause 4.12.4
Technical Parameters For Lamp Holders Rotational Torque Test Apparatus:
| Torque Display | Digital display, torque range: 0-10N.m, with maximum torque hold function, upper limit alarm can be set |
| Lampholders Clamp | The lampholder is fixed with the clamp, operator directly rotates the opposite light source to measure the positive and negative torque of the lampholder |
| Extended Function |
Can be used to process torque test for lamp caps, test lampholders can be equipped, E27, E26, B22d, E14, E10, E40, B15 test lampholders are optional.
|
| Use Environment | AC220V,50Hz |
| Structure | Digital display, with a clamp for lamp holders |
Test Principle For Lamp Holders Rotational Torque Test Apparatus:
Adopt electronic torque sensor, the torque value can be measured and displayed in real time, operator manually rotates the light source, test torque is applied for 1 min in a clockwise and anti-clockwise direction, then check the displayed torque indication value on the LCD.
Application For Lamp Holders Rotational Torque Test Apparatus:
To test the influence of the rotational torque on the lampholders during the replacement of the light source.
IEC 60238 Clause 16.2 Figure 6 Torque Test Apparatus With Lamp Holder Gauge E14/E27/E40
IEC 60238 Clause 16.2 Figure 6 Torque Test Apparatus With Lamp Holder Gauge E14/E27/E40 This torque test apparatus is designed to comply with Clause 16.2 and 16.4 Figure 6 of IEC 60238:2016+A1:2017+A2:2020 standards for testing lamp holder durability and mechanical strength. Test Procedures and ...
IEC62560 Clause 15 Figure 8 Lamp Testing Equipment for Non Dimmable Lamps Compliance Test
IEC62560 Clause 15 Figure 8 Lamp Testing Equipment for Non Dimmable Lamps Compliance Test This testing equipment is specifically designed to meet the requirements of IEC 62560 Clause 15, providing a reliable and standardized solution for evaluating the performance of non-dimmable self-ballasted LED ...
IEC 62560 Clause 6 Interchangeability Gauges For E14 And E27 Lamp Cap 7006-28A-1
IEC 62560 Clause 6 Interchangeability Gauges For E14 And E27 Lamp Cap 7006-28A-1 Product Overview: Our Lamp Cap Gauges are meticulously designed to meet the dimensional and safety requirements outlined in IEC 60061-3, supporting compliance with IEC 60598-1, IEC 62560:2015, and other related lighting ...
IEC 60061-3 Lamp Cap Gauges Precision CNC Gauge Set for E26, GZ10, GX53, B15d, and E11 Testing
IEC 60061-3 Lamp Cap Gauges Precision CNC Gauge Set for E26, GZ10, GX53, B15d, and E11 Testing Product Overview: The Lamp Cap Gauges are manufactured in full compliance with IEC 60061-3, as required by IEC 60598-1, IEC 62560:2015, and related lighting standards. They are used for dimensional and ...
