Send Message
products
PRODUCTS DETAILS
Home > Products >
IEC 60598-1 Luminaries Adjusting Devices 360° Movement PLC Control Test Apparatus

IEC 60598-1 Luminaries Adjusting Devices 360° Movement PLC Control Test Apparatus

MOQ: 1
Price: Customized
Standard Packaging: Plywood
Delivery Period: 30 Days
Payment Method: L/C, , T/T, Western Union, MoneyGram
Supply Capacity: 20 sets per month
Detail Information
Place of Origin
China
Brand Name
Sinuo
Certification
Calibration Certificate (Cost Additional)
Model Number
SN996
Use Environment:
AC220V50Hz
Test Station:
Single Station
Stretching Stroke:
0-650mm, Manual
Drive Mode:
Servo Motor Drive
Rotation Angle:
0-360°.
Controller:
PLC.
Test Speed:
0-10 Times / Min
Test Times:
0~999999 Presettable
Minimum Order Quantity:
1
Price:
Customized
Packaging Details:
Plywood
Delivery Time:
30 Days
Payment Terms:
L/C, , T/T, Western Union, MoneyGram
Supply Ability:
20 sets per month
High Light:

IEC 60598-1 Luminaries Adjusting Devices

,

360° Movement Luminaries Adjusting Devices

,

PLC Control Luminaries Adjusting Devices

Product Description

 

IEC 60598-1 Luminaries Adjusting Devices 360° Movement PLC Control Test Apparatus

 

Product information:

 

The test equipment is designed and manufactured according to clause 4.14.3 of IEC 60598-1, mainly used for the lamps adjustment devices’ torsion, and bending test of the table lamps, floor lamps and the lamps which are for professional use (such as a plotter lamps).

To verify adjusting devices or means of adjustment, for example joints, hoisting devices, adjusting brackets or telescopic tubes, shall be so constructed that cords or cables are not pressed, clamped, damaged or twisted along the longitudinal axis by more than 360° during operation.

 

Test principle:

 

Adopts the motor to drive the turntable, then simulates normal operation of lamp adjusting devices and then reset.

The adjusting devices, equipped with the appropriate cable or cord shall be operated in according with IEC 60598-1: 2014 table 4.5. A cycle of operation is a movement from one extreme of the range to the other and back to the starting position. The rate of movement shall not cause the device to hear appreciably and shall not exceed 600 cycles per hour.

 

Product features:

 

Adjusting devices and means of adjustment, for example joints, hoisting devices, adjusting brackets or telescopic tubes, shall be so constructed that cords or cables are not pressed,clamped, damaged or twisted along the longitudinal axis by more than 360° during operation. NOTE If a luminaire has more than one joint the 360° limit applies to each joint if they are not too close together. Each case needs to be judged on its own merits.
Compliance is checked by the following test:
A cycle of operation is a movement from one extreme of the range to the other and back to the starting position. The rate of movement shall not cause he device to heat appreciably and shall not exceed 600 cycles per hour.

Compliance is checked by inspection:
After the test, not more than 50 % of the strands in a conductor shall be broken nor shall there be any serious damage to the insulation, if any, of the flexible cord. The cord or cable shall be subjected to, and shall satisfy, the insulation resistance and high-voltage tests specified in Section 10.
Ball-joints and the like, where the clamping means can be adjusted, are tested with the joints only lightly clamped to avoid excessive friction. If necessary, the clamping areas are readjusted during the test. For adjusting devices that consist of a flexible tube, the range of adjustment for this test is normally 135° in both directions from the vertical. However, where this adjustment cannot be achieved without using unreasonable force, the flexible tube is bent only to the positions where it will remain by itself.

 

Main technical parameter:

 

Test station Single station
Electrical control method

PLC intelligent integrated control, 7-inch human-machine touch interface operation.

Drive mode Servo motor drive
Maximum radius R500mm
Tensile movements stroke 0-500mm
Action angle of rotation 0-360°
Test cycles Can be set, the number of cycles range 1-999999.
Test range The fixtures can meet a variety of samples within the standard range of testing needs.
Motor Stepper motor.
Controller PLC
Display 7” touch screen interface
Language English interface
Dimensions 680*680*1500mm
Power supply AC110v,60Hz

 

 

IEC 60598-1 Luminaries Adjusting Devices 360° Movement PLC Control Test Apparatus 0

 

IEC 60598-1 Luminaries Adjusting Devices 360° Movement PLC Control Test Apparatus 1

products
PRODUCTS DETAILS
IEC 60598-1 Luminaries Adjusting Devices 360° Movement PLC Control Test Apparatus
MOQ: 1
Price: Customized
Standard Packaging: Plywood
Delivery Period: 30 Days
Payment Method: L/C, , T/T, Western Union, MoneyGram
Supply Capacity: 20 sets per month
Detail Information
Place of Origin
China
Brand Name
Sinuo
Certification
Calibration Certificate (Cost Additional)
Model Number
SN996
Use Environment:
AC220V50Hz
Test Station:
Single Station
Stretching Stroke:
0-650mm, Manual
Drive Mode:
Servo Motor Drive
Rotation Angle:
0-360°.
Controller:
PLC.
Test Speed:
0-10 Times / Min
Test Times:
0~999999 Presettable
Minimum Order Quantity:
1
Price:
Customized
Packaging Details:
Plywood
Delivery Time:
30 Days
Payment Terms:
L/C, , T/T, Western Union, MoneyGram
Supply Ability:
20 sets per month
High Light

IEC 60598-1 Luminaries Adjusting Devices

,

360° Movement Luminaries Adjusting Devices

,

PLC Control Luminaries Adjusting Devices

Product Description

 

IEC 60598-1 Luminaries Adjusting Devices 360° Movement PLC Control Test Apparatus

 

Product information:

 

The test equipment is designed and manufactured according to clause 4.14.3 of IEC 60598-1, mainly used for the lamps adjustment devices’ torsion, and bending test of the table lamps, floor lamps and the lamps which are for professional use (such as a plotter lamps).

To verify adjusting devices or means of adjustment, for example joints, hoisting devices, adjusting brackets or telescopic tubes, shall be so constructed that cords or cables are not pressed, clamped, damaged or twisted along the longitudinal axis by more than 360° during operation.

 

Test principle:

 

Adopts the motor to drive the turntable, then simulates normal operation of lamp adjusting devices and then reset.

The adjusting devices, equipped with the appropriate cable or cord shall be operated in according with IEC 60598-1: 2014 table 4.5. A cycle of operation is a movement from one extreme of the range to the other and back to the starting position. The rate of movement shall not cause the device to hear appreciably and shall not exceed 600 cycles per hour.

 

Product features:

 

Adjusting devices and means of adjustment, for example joints, hoisting devices, adjusting brackets or telescopic tubes, shall be so constructed that cords or cables are not pressed,clamped, damaged or twisted along the longitudinal axis by more than 360° during operation. NOTE If a luminaire has more than one joint the 360° limit applies to each joint if they are not too close together. Each case needs to be judged on its own merits.
Compliance is checked by the following test:
A cycle of operation is a movement from one extreme of the range to the other and back to the starting position. The rate of movement shall not cause he device to heat appreciably and shall not exceed 600 cycles per hour.

Compliance is checked by inspection:
After the test, not more than 50 % of the strands in a conductor shall be broken nor shall there be any serious damage to the insulation, if any, of the flexible cord. The cord or cable shall be subjected to, and shall satisfy, the insulation resistance and high-voltage tests specified in Section 10.
Ball-joints and the like, where the clamping means can be adjusted, are tested with the joints only lightly clamped to avoid excessive friction. If necessary, the clamping areas are readjusted during the test. For adjusting devices that consist of a flexible tube, the range of adjustment for this test is normally 135° in both directions from the vertical. However, where this adjustment cannot be achieved without using unreasonable force, the flexible tube is bent only to the positions where it will remain by itself.

 

Main technical parameter:

 

Test station Single station
Electrical control method

PLC intelligent integrated control, 7-inch human-machine touch interface operation.

Drive mode Servo motor drive
Maximum radius R500mm
Tensile movements stroke 0-500mm
Action angle of rotation 0-360°
Test cycles Can be set, the number of cycles range 1-999999.
Test range The fixtures can meet a variety of samples within the standard range of testing needs.
Motor Stepper motor.
Controller PLC
Display 7” touch screen interface
Language English interface
Dimensions 680*680*1500mm
Power supply AC110v,60Hz

 

 

IEC 60598-1 Luminaries Adjusting Devices 360° Movement PLC Control Test Apparatus 0

 

IEC 60598-1 Luminaries Adjusting Devices 360° Movement PLC Control Test Apparatus 1

Sitemap |  Privacy Policy | China Good Quality Electrical Appliance Testing Equipment Supplier. Copyright © 2019-2024 sinuotek.com . All Rights Reserved.