|
Product Details:
Payment & Shipping Terms:
|
| Force Range: | 1~20kN | Force Deviation: | ≤±1% FS |
|---|---|---|---|
| Crushing Travel: | 300mm | Nail Penetration Speed: | 1 ~ 40mm/s |
| Driving Method: | Servo Motor Driving | Control Method: | Computer Control |
| High Light: | battery charge discharge test equipment,battery discharge analyzer |
||
UN38.3 IEC62133 Battery Cell 13kN Crushing Acupuncture Computer Control Testing Equipment
Overview:
This Battery Crush Acupuncture Test Machine is designed to simulate actual using environments for the lithium battery such as battery in crush and feedback the various results in different crushing conditions.
Capacitor is placed between two crushing boards, the motor drives the screw to transmit the crushing force onto battery. The screw returns if a pre-set force value reached, or voltage dropped to a pre-set value, or the battery deformed then repeat a cycle between periodic crushing and return.
Standards Compliant:
It is conforming to UN38.3 clause .4.6.3, IEC62133:2017 clause 7.3.6, IEC62133:2012 clause 7.3.6, 8.3.5, IEC60086-4 clause 6.5.3 IEC 60086-1 and etc.
Technical Parameters:
| Force Range | 1~20kN (2 ton, available manual control with Max. output force, force range, includes a 13kN output force) |
| Tester Architecture | Free Stand & Vertical extrusion |
| Power Input | 220V 50 Hz or 110V 60Hz (can be customized) |
| Force Deviation | ≤±1% Full-scale Range |
| Unit Shift | Kgf, lbf, n, kn, kpa, m pa |
| Crushing Velocity | 1~ 900mm/min(controllable) |
| Crushing Velocity Accuracy | ≤±1% Full-scale Range |
| Crushing Travel | 300mm |
| Crushing Motion Accuracy | ≤±1% Full-scale Range |
| Available Battery Size | W400mm X D400mm X H300mm |
| Voltage-Reducing Controlling Method | The pressing plate returns or returns after crushing force continues for a fixed time if voltage drop into a fixed value. |
| Crushing Force Controlling Method | The pressing plate returns or return after crushing force continues within pre-set time if pressing force reach set value. |
| Displacement Control | After paused in a period if the pressing tray down to predesigned position, pressing tray will continue second displacement and pause, by repeating such a working mode till to final displacement and pressing tray return after a period maintaining |
| Emergency Button | This crushing tester designed with Emergency stop function |
| Voltage Resolution | 1mv |
| Test Terms | Force, Displacement (Deformation), Voltage, one from three projects or all three projects |
| Crushing Time Maintaining | 0~99 Hours 99 Minutes & 99 seconds, time can be controllable to control the deformation and stop if test fulfilled |
| Industrial Communication | Computer Control, ensure stability and real-time of remote sampling, with explosion-proof function, all data can be store and print through computer with Excel format. |
| Driving Method | Servo Motor Driving |
| Nail Penetration Speed | 1 ~ 40mm/s(Controllable) |
| Tungsten steel needle |
Φ3X100MM: 10 pieces Φ4X100MM: 10 pieces Φ6X100MM: 10 pieces Φ6X100MM: 10 pieces |
Standard Configuration:
| 1 | Computer Cabinet & Controller One E.A |
| 2 | Computer( Better than the below configuration: 19inch LCD Display,(TM) 2 dual core |
| processor, 2GB DDR2,320GB)1Set | |
| 3 | High resolution camera 1 set |
| 4 |
Diameter 150MM flat crush disk 1 set
|
| 5 | Force Sensor System one set |
| 6 | Voltage sampling system 1 E.A |
| 7 | Fire-extinguishing system 1E.A. |
| 8 | CD (control software) and operation manual 1 copy |
| 9 | Steel needle clamp 1 E.A |
Contact Person: Manager
Tel: +8613527656435
| Factory Address:#301, Building 2, No. 123 of Zhongsheng Road, Zhongcun Street, Panyu District, Guangzhou, China, 511490 | |
| Sales office:#301, Building 2, No. 123 of Zhongsheng Road, Zhongcun Street, Panyu District, Guangzhou, China, 511490 | |
| +86-020-39185976 | |
| sales@sinuotek.com | |
