IEC 62368-1 Clause 5.4.11 Non - Inductive Resister 5k Ω For Current Leakage
| Applied standard: | IEC 62368-1 | Applied clause: | Clause 5.4.11 |
| Test sample: | Current Leakage | Test condition: | Normal / Abnormal / Single Fault |
| Specification: | 5000 Ω | Warranty: | One Year |
| High Light: | Clause 5.4.11 Non Inductive Resister,IEC 62368-1 Non Inductive Resister,Current Leakage Non Inductive Resister |
||
IEC 62368-1 Clause 5.4.11 Non - Inductive Resister 5k Ω For Current Leakage
Product Information:
This non-inductive resistor, category: wire-wound resistors. It is required by IEC 62368-1:2018 clause 5.4.11 and Annex H, IEC 60950-1 clause 2.4.2, IEC 60065-1:2014 clause 7. Used to test the leakage current between primary and secondary.
Test Procedures and Operation
Please refer to the relevant standards.
Take IEC 60335-1 clause 8 as an example:
Voltages and currents are measured between the relevant parts and each pole of the supply source. Discharges are measured immediately after the interruption of the supply. The quantity of electricity in the discharge is measured using a resistor having a nominal non-inductive resistance.
NOTE 1 Details of a suitable circuit for measuring the current are given in figure 4 of IEC 60990.
NOTE 2 The quantity of electricity is calculated from the sum of all areas recorded on the voltage/time graph without taking voltage polarity into account.
IEC 60335-1 Clause 22.5 Residual Voltage Tester Testing Range 5~150V Test Impedance ≥1000 MΩ
IEC 60335-1 Clause 22.5 Residual Voltage Tester Testing Range 5~150V Test impedance ≥1000 MΩ Product information: The Residual Voltage Tester is in accordance with the requirements of IEC 60335-1 Clause 22.5 (GB4706.1 Clause 22.5),IEC 60065 Clause 9.1.6 (GB8898 Clause 9.1.6), IEC 60601-1 (GB9706.1 ...
IEC 60335-2-7 Durability Test Equipment For Electric Washing Machine Doors
IEC 60335-2-7 Durability Test Equipment For Electric Washing Machine Doors SN1401 is a washing machine door and lid interlocking device durability test equipment designed for IEC 60335-2-7:2016 clause 18.101. It is used to test the reliability of the interlocking device of washing machine doors or ...
IEC 60335-1 Clause 11.2 Black Test Corner For Temperature Rising Test Corner
IEC 60335-1 clause 11.2 Black Test Corner For Temperature Rising Test Corner Product information: This test corner conforms to the standard requirement of IEC 60335-1 clause 11.2, IEC60065 clause 7, etc. It is designed and manufactured to provide the required environment for the temperature rising ...
Adjustable Temperature Rise Test Corner with 48-Point K-Thermocouple Grid IEC 60065
Adjustable Temperature Rise Test Corner with 48-Point K-Thermocouple Grid IEC 60065 Product information: The Temperature Rise Test Corner is designed and manufactured to meet the testing requirements specified in IEC 60335-1 Clause 11.2 and IEC 60065 Clause 7, among other standards. It provides a ...
