|
| MOQ: | 1 |
| Price: | Customized |
| Standard Packaging: | Plywood |
| Delivery Period: | 1 Month |
| Payment Method: | L/C, T/T, Western Union, MoneyGram |
| Supply Capacity: | 20 Sets Per Month |
IEC60335 Electrical Appliance Cord Anchorage Pull Force And Torque Test Apparatus
Standards & Clauses:
IEC60335-1:2016 “Household and similar electrical appliances-Safety-Part1:General requirements” clause 25.15
GB2099.1-2008
GB3883.1-2008
GB4706.1-2005
GB7000.1-2015
GB8898-2011clause 16.5
IEC60884-1:2006
IEC60745-1:2006
IEC60598-1:2014
IEC60065:2005clause 16.5 Audio, video and similar electronic apparatus-Safety requirements
Technical Parameters:
| Test Station | Single |
| Control Method | Touch screen |
| Drive Method | Motor and electromagnet drive |
| Clamping Method for Specimen | Mechanical clamping, the height of clamping point is adjustable through adjusting screw rod |
| Pull Weight | 10N * 1 piece, 20N * 3 pieces, 30N * 2 pieces (Can achieve 30N, 40N, 60N, 80N, 100N, 120N pull force) |
| Torque Weight | 4N* 1 piece , 5N* 1 piece , 7.5N* 1 piece , 12.5N* 1 piece , 17.5N* 1 piece , 21.25N* 1 piece,torque arm is 20mm (can achieve 0.08N.m, 0.1 N.m, 0.15N.m, 0.25 N.m, 0.35 N.m, 0.425 N.m torque) |
| Pull Cycles | 0~999999 can be preset, default of 25 cycles |
| Pull Frequency | 1 cycle / s |
| Torque Time | 0.1S～99 h 59 m 59s |
| Test Contents | Pull and torque testing: make a mark on the cord where is 20mm to the anchorage, then apply the pull force at a rate of 1 time/second, after finishing pull testing, apply the torque for 1 min. The displacement of the mark position on the cord should not exceed 2 mm after testing. |
| Samples and Restrictions | Plugs for connecting flexible cables, fixed or mobile sockets; hand-held power tools; household appliances with flexible cord anchorage (eg induction cookers, washing machines); lamps with cables and wires; audio and video and related signal electronic devices with flexible cords (such as projectors) |
| Application | The cord anchorage shall relieve conductors from strain, including twisting, at the terminals and protect the insulation of the conductors from abrasion. This testing appliance applies pull force and torque tests for cord anchorage, to verify the reliability of the cord anchorage. |
| Test Principle | The eccentric wheel is driven by a motor, to make the pull weight pulled for 1s; the torque is applied to the sample by the electromagnet releases the torque weight, at the same time, the direction of the force applied and the axis of the sample form a torque arm through the torque wheel, so as to achieve torque test. The pull weights and torque weights can be customized to meet different requirements in different standards. |
| Structure |
The equipment adopts motor cam ejector mechanism, the pull fixture is combined with the torque fixture, and matched by the bearing in the middle to reduce the friction during the torque test. The Z-shaped structure enables the fixture to clamp the appliance’s power cord which is 150mm above the bottom surface. It can test the firmness of the power cord anchorage of large household appliances, such as refrigerators and washing machines. Equipment dimensions:about:800×400×1200(mm)W×D×H Equipment weight:110kg |
| Use Environment | Power supply:AC220V±10%/50-60Hz,0.3KW |
|
|
| MOQ: | 1 |
| Price: | Customized |
| Standard Packaging: | Plywood |
| Delivery Period: | 1 Month |
| Payment Method: | L/C, T/T, Western Union, MoneyGram |
| Supply Capacity: | 20 Sets Per Month |
IEC60335 Electrical Appliance Cord Anchorage Pull Force And Torque Test Apparatus
Standards & Clauses:
IEC60335-1:2016 “Household and similar electrical appliances-Safety-Part1:General requirements” clause 25.15
GB2099.1-2008
GB3883.1-2008
GB4706.1-2005
GB7000.1-2015
GB8898-2011clause 16.5
IEC60884-1:2006
IEC60745-1:2006
IEC60598-1:2014
IEC60065:2005clause 16.5 Audio, video and similar electronic apparatus-Safety requirements
Technical Parameters:
| Test Station | Single |
| Control Method | Touch screen |
| Drive Method | Motor and electromagnet drive |
| Clamping Method for Specimen | Mechanical clamping, the height of clamping point is adjustable through adjusting screw rod |
| Pull Weight | 10N * 1 piece, 20N * 3 pieces, 30N * 2 pieces (Can achieve 30N, 40N, 60N, 80N, 100N, 120N pull force) |
| Torque Weight | 4N* 1 piece , 5N* 1 piece , 7.5N* 1 piece , 12.5N* 1 piece , 17.5N* 1 piece , 21.25N* 1 piece,torque arm is 20mm (can achieve 0.08N.m, 0.1 N.m, 0.15N.m, 0.25 N.m, 0.35 N.m, 0.425 N.m torque) |
| Pull Cycles | 0~999999 can be preset, default of 25 cycles |
| Pull Frequency | 1 cycle / s |
| Torque Time | 0.1S～99 h 59 m 59s |
| Test Contents | Pull and torque testing: make a mark on the cord where is 20mm to the anchorage, then apply the pull force at a rate of 1 time/second, after finishing pull testing, apply the torque for 1 min. The displacement of the mark position on the cord should not exceed 2 mm after testing. |
| Samples and Restrictions | Plugs for connecting flexible cables, fixed or mobile sockets; hand-held power tools; household appliances with flexible cord anchorage (eg induction cookers, washing machines); lamps with cables and wires; audio and video and related signal electronic devices with flexible cords (such as projectors) |
| Application | The cord anchorage shall relieve conductors from strain, including twisting, at the terminals and protect the insulation of the conductors from abrasion. This testing appliance applies pull force and torque tests for cord anchorage, to verify the reliability of the cord anchorage. |
| Test Principle | The eccentric wheel is driven by a motor, to make the pull weight pulled for 1s; the torque is applied to the sample by the electromagnet releases the torque weight, at the same time, the direction of the force applied and the axis of the sample form a torque arm through the torque wheel, so as to achieve torque test. The pull weights and torque weights can be customized to meet different requirements in different standards. |
| Structure |
The equipment adopts motor cam ejector mechanism, the pull fixture is combined with the torque fixture, and matched by the bearing in the middle to reduce the friction during the torque test. The Z-shaped structure enables the fixture to clamp the appliance’s power cord which is 150mm above the bottom surface. It can test the firmness of the power cord anchorage of large household appliances, such as refrigerators and washing machines. Equipment dimensions:about:800×400×1200(mm)W×D×H Equipment weight:110kg |
| Use Environment | Power supply:AC220V±10%/50-60Hz,0.3KW |
