|
Product Details:
Payment & Shipping Terms:
|
| Applied Standard: | IEC 62368-1 | Applied Clause: | Y.4.4 Figure Y.1 |
|---|---|---|---|
| Test Specimens: | Gasket Material | Material: | Stainless Steel |
| High Light: | Clause Y.4.4 Cylindrical Weight,IEC 62368-1 Cylindrical Weight,Impact Hammer Cylindrical Weight |
||
IEC 62368-1 Clause Y.4.4 Cylindrical Weight for 69 kPa 1,35 KG Impact Hammer
Product information:
This cylindrical weight is required by IEC 62368-1:2018 clause Y.4.4.
It is used to apply 69 kPa, it shall be placed on the middle portion of each specimen for a period of 2 h.
Material: stainless steel.
This 1.35 kg impact hammer is required by IEC 62368-1:2018 clause Y.4.4.
It is used to impact the specimen from 150 mm (manually).
The hammer head should be steel, 28.6 mm in diameter and have a flat striking surface, 25.4 mm in diameter with slightly rounded edges.
Technical Parameters:
| Model | Cylindrical Weight for 69 kPa | 1,35 kg Impact Hammer |
| Applied standard | IEC 62368-1 | |
| Applied clause | Y.4.4 Figure Y.1 | |
| Test specimens | Gasket material | |
| Room temperature | 25 ℃±3℃ | |
| The mass | 69 kPa | 1,35kg |
| Material | Stainless steel | |
Contact Person: Ms. Zoe Zou
Tel: +86 13527656435
Fax: 86-020-39185976
| Factory Address:Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China | |
| Sales office:Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China | |
| +86-020-39185976 | |
| sales@sinuotek.com | |
