IEC 62368-1 Test Equipment Annex T10 Glass Fragmentation Test Square Of 50mm Side
| Applied standard: | IEC 62368-1 | Applied clause: | T10 |
| Test sample: | Glass Fragmentation | Test distance: | 15mm |
| Square size: | 50 Mm For Each Sides | Material: | Acrylic Plastic |
| High Light: | Annex T10 IEC 62368 Test Equipment,50mm Side IEC 62368 Test Equipment |
||
IEC 62368-1 Annex T10 Glass Fragmentation Test Square of 50mm side
Standards and Clauses:
The test square conforms to IEC 62368-1:2018 Annex T10.
Test Process:
After the test sample is shattered with a center punch placed approximately 15mm in front the midpoint of one of the longer edges of the test sample. After a maximum of 5 min of fracture, and without using any aid to vision, except spectacles if normally worn, the particles are counted in a square of 50 mm side located approximately at the centre of the area of coarsest fracture and excluding any area within 15 mm of any edge or hole. The test sample shall fragment in such a way that the number of particles counted in a square with sides of 50 mm shall not be less than 45.
IEC 62368 Cl 9.6.2 Fig 47/48/49 Steel Disc Aluminum Ring Aluminum Foil
IEC 62368 Cl 9.6.2 Fig 47/48/49 Steel Disc Aluminum Ring Aluminum Foil Product Overview: They are the accessories (foreign objects) for testing wireless power transmitter. Applied Standards: The steel disc conforms to IEC 62368-1:2018 clause 9.6.2 and figure 47. The aluminum ring conforms to IEC ...
Intelligent Compressive Strength Testing Machine Packaging Testing Equipment IEC 62368-1
Intelligent Compressive Strength Testing Machine Packaging Testing Equipment IEC 62368-1 Product Information: This machine is the most direct test instrument for verifying the compressive strength of cartons or other packaging containers. It is used to determine the compressive strength of cartons, ...
Oil Immersion Test Chamber IEC 62368-1 For Rubber & Enameled Wire Testing Oil Resistance Tester
Oil Immersion Test Chamber IEC 62368-1 For Rubber & Enameled Wire Testing Oil Resistance Tester Product Overview: This Oil Immersion Test Chamber is designed for evaluating the oil resistance of rubber and plastic insulators or enameled wires, as required by ASTM D471-98 and IEC 62368-1:2018 clause ...
IEC 62368-1 Annex G15.2.3 High And Low Temperature Tensile Testing Equipment Test Force 500kg
IEC 62368-1 Annex G15.2.3 High And Low Temperature Tensile Testing Equipment Test Force 500kg Product overview: This machine is controlled by computer and is widely used in mechanical performance tests of non-metallic materials such as rubber, plastics, wires and cables, textiles, waterproof ...
