IEC 62133 Cells 11.6 kPa High Altitude Simulation Low Pressure Vacuum PLC Control Test Chamber
| Internal Material: | Stainless Steel | External Material: | Powder Painted Steel Plate |
| Display Method: | Touch Screen | Control Method: | PLC |
| Pressure Range: | 0~100Kpa | Pressure Fluctuation: | ≤5% |
| High Light: | battery charge discharge test equipment,high frequency vibration generator |
||
IEC 62133 Cells 11.6 kPa High Altitude Simulation Low Pressure Vacuum Test Chamber
Overview:
It is for battery low pressure (high attitude) simulation testing, all the testing specimen are being tested under 11.6kPa (1.68psi).
To judge the test result on condition of no explosion, flame, smoke, electric leakage after test. And the battery protection valve should not be broken.
Standards Compliant:
It conforms to IEC62133:2017 clause 7.3.7, IEC62133:2012 clause 7.3.7, IEC60086-4 clause 6.4.1, IEC 60086-1, UN 38.3, UL 1642, IEC61960, and etc.
Structure:
- The outer chamber adopts high quality cold rolled steel plate, powder painted surface, with strong anti-rust ability.
- The working room is made of high-quality stainless-steel plate, rounded shape, smooth, and easy for cleaning.
- Between working room and outerchamber, filled with superfine glass fiber insulation material.
- Chamber door adopts double toughened glass, available for clear observation of the inside chamber.
- Rubber sealing ring between working room and glass door is Installed, to ensure high vacuum rate inside the chamber.
- Integrated type: low pressure chamber on upper side, and vacuum pump on bottom side.
Technical Parameters:
| Temp. Range |
Ambient Temperature Note: When using, the internal temperature of the laboratory must be controlled to be (20°C+5°C) to reach the temperature requirement in the test box. |
| Display Method | Touch Screen |
| Control | PLC |
| Pressure Unit | Kpa |
| Internal Dimension | W600 X D600 X H600mm |
| Internal Material | SUS 304# Stainless Steel |
| External Dimension | W940 X D780 X H1620mm |
| External Material | SECC steel plate, powder painted (thickness 1.5mm) |
| Bottom | Installed with casters |
| Observation Window | Toughened glass with explosion - proof membrane |
| Timer | 0~9999(Hour, Minutes, Seconds changeable, can be preset and displayed on touch screen) |
|
Vacuum Rate Safety Devices |
1.3Kpa(standard requires 11.6Kpa, vacuum gauge indication value -89.7Kpa) |
| Remarks: as the inner chamber pressure is(101.325Kpa), if wants the inner chamber pressure decreased to 11.6Kpa. Calculating according to atmosphere pressure of(101.325Kpa), need to blow out (89.7Kpa) pressure of the inside chamber, then the inner chamber can reach low pressure environment of (11.6Kpa). | |
| Pressure Range | 0~100Kpa(Controllable, display) |
| Pressure Fluctuation | ≤5% |
| Power Source | AC 220V 60HZ |
| Power | 2.0KW |
| Working Principle |  |
|
Touch Screen Monitoring (in English) |
|
IEC 62133-2 Battery Internal Short Circuit Tester with Temperature & Force Control
IEC 62133-2 Battery Internal Short Circuit Tester with Temperature & Force Control The Battery Internal Short Circuit Tester is a fully integrated safety testing system designed to evaluate battery behavior under forced internal short-circuit conditions. This advanced equipment combines temperature ...
UL 2580 Clause 26 Temperature Controlled External Short Circuit Tester With High Current 2000A
UL 2580 Clause 26 Temperature Controlled External Short Circuit Tester High-current 2000A testing system for comprehensive battery safety evaluation under controlled temperature conditions. Compliance Standards Conforms to UL 2580 Clause 26, IEC62133-1:2017 Clause 7.3.2, IEC62133-2:2017 Clauses 7.3...
Vehicle Battery Testing Equipment Crush And Penetration Test SAE J2464
Vehicle Battery Testing Equipment Crush And Penetration Test SAE J2464 Product Information Standard: Conforms to SAE J2464 Standard (Clause 4.3.3.1: Penetration Test; Clause 4.3.6.1: Crush Test), AIS 038 crush test in page no. 79 of 106 cl.no. 3.2, Nail penetration test in page no. 101 of 106 cl.no. ...
IEC 62133 Electromagnetic Vibration Test System For Battery Testing
IEC 62133 Electromagnetic Vibration Test System For Battery Testing Vibration testing involves subjecting a component or device to simulated stresses in order to evaluate its response to real-world conditions. This testing is essential for ensuring product durability and reliability across diverse ...
