IEC 62133 Li-ion Battery and Cell Free Fall 1 M Pneumatic Drop Motor Lifting Test Equipment
| Drop Height: | 300～1500mm | Loading Capacity: | 0~2 Kg (can Be Customized) |
| Drop Method: | Pneumatic Dropping | Lifting Method: | Motor Lifting |
| High Light: | battery charge discharge test equipment,high frequency vibration generator |
||
IEC 62133 Power Li-ion Battery and Cell Free Fall 1 M Pneumatic Drop Test Equipment
Overview:
This battery free fall testing machine applies for small consumer electronic products like mobile phone, mobile batteries, interphone, electronic dictionary, CD/MD/MP3, and components free dropping testing; specimen is automatically lift to pre-setting height, then free dropped onto a concrete plate.
Standards Compliant:
It is confirm to IEC62133:2017 clause 7.3.3, IEC62133:2012 clause 7.3.3, 8.3.3, IEC60086-4:2014 clause 6.5.6, IEC 60086-1, etc.
Technical Parameters:
| Drop Height |
300～1500mm (can be customized. The range is controllable, with steel ruler, the min. indication value :1mm) |
| Height Display | Stainless steel ruler (min.indicator value:1mm) |
| Drop Orientation | Face, edge, corner dropping |
| Loading Capacity |
0～2kg (can be customized) |
| Specimen Max. Dimension |
L150*W200(MM)
(can be customized)
|
| Drop floor material | Steel plate (hard wood board, marble board, acrylic board and cement board can be optional) |
| Machine Power | 0.75KW |
| Drop method | Free fall through pneumatic dropping |
| Lifting method | Motor lifting |
| Power Source |
220V 50Hz or 110V 60Hz (can be customized) |
| Air Source | ＜1mpa (prepared by client) |
| Control Method | Button Control |
Special test procedure as per IEC 60086-4:2014 clause 6.5.6:
The test batteries shall be dropped from a height of 1 m onto a concrete surface. Each test battery shall be dropped six times, a prismatic battery once from each of its six faces, a round battery twice in each of the three axes shown in Figure 5. The test batteries shall be stored for 1 h afterwards.
Clamping & Releasing Device for Specimen
IEC 62133-2 Battery Internal Short Circuit Tester with Temperature & Force Control
IEC 62133-2 Battery Internal Short Circuit Tester with Temperature & Force Control The Battery Internal Short Circuit Tester is a fully integrated safety testing system designed to evaluate battery behavior under forced internal short-circuit conditions. This advanced equipment combines temperature ...
UL 2580 Clause 26 Temperature Controlled External Short Circuit Tester With High Current 2000A
UL 2580 Clause 26 Temperature Controlled External Short Circuit Tester High-current 2000A testing system for comprehensive battery safety evaluation under controlled temperature conditions. Compliance Standards Conforms to UL 2580 Clause 26, IEC62133-1:2017 Clause 7.3.2, IEC62133-2:2017 Clauses 7.3...
Vehicle Battery Testing Equipment Crush And Penetration Test SAE J2464
Vehicle Battery Testing Equipment Crush And Penetration Test SAE J2464 Product Information Standard: Conforms to SAE J2464 Standard (Clause 4.3.3.1: Penetration Test; Clause 4.3.6.1: Crush Test), AIS 038 crush test in page no. 79 of 106 cl.no. 3.2, Nail penetration test in page no. 101 of 106 cl.no. ...
IEC 62133 Electromagnetic Vibration Test System For Battery Testing
IEC 62133 Electromagnetic Vibration Test System For Battery Testing Vibration testing involves subjecting a component or device to simulated stresses in order to evaluate its response to real-world conditions. This testing is essential for ensuring product durability and reliability across diverse ...
