|
Product Details:
Payment & Shipping Terms:
|
| Chamber Quantities: | Can Be Customized | Chamber Size: | Can Be Customized |
|---|---|---|---|
| Inner Chamber Material: | 1.5mm Stainless Steel | External Chamber Material: | Cold Rolled Steel |
| High Light: | battery charge discharge test equipment,high frequency vibration generator |
||
Lithium Nickel-Cadmium Battery and Cell Charged Discharged Explosion Proof Stainless Steel Test Chamber
Overview:
This explosion proof testing chamber is used to prevent unnecessary explosion or burning damage to the test personnel during the battery overcharge and over discharge testing. The inner chamber is made of stainless steel with good texture and anti-explosion effect, the test chamber can be customized by customer’s requirements.
Standards Compliant:
It is conforming to standard of IEC62133-1/-2:2017 clause 7.1, 7.2.1, 7.3.8, 7.3.9, IEC62133-1/-2:2012 clause 8.2.1, 8.3.6, 8.3.7, IEC 60086-1, IEC60622, IEC60623, IEC61951, IEC61960, and so on.
Technical Parameters:
| Chamber Quantities | 2 or 4 or 8 optional (can be customized) |
| Inner Chamber Size | W500 X H500 X D500mm (can be customized) |
| Inner chamber Material | 1.5mm stainless steel |
| External Chamber Material | Cold rolled steel with spray treatment |
| Explosion-proof Glass | Double 200X200 explosion proof glass, visible |
| Chamber door | Connected to the chamber by powerful hinge, with explosion proof lock |
| Bottom | One piece of marble slab to protect from battery external short circuit |
| Top | Equipped with a high brightness energy-saving lamps to illuminate the entire test space |
| Venting fan | A strong exhaust fan is installed in the back of the chamber |
| Pressure relief door | built in the back of each chamber. In the event of a battery explosion, the door will open and release pressure. |
| Testing port | Diamter:50mm cable port with stainless steel cover |
| Control Panel | Control the venting fan and lighting |
| Inside | 2 power line with two insulated handle thread clamps inside the chamber, which is used to clamp the positive and negative pole of the battery |
| Wheels | Installed with universal wheel at the bottom of the chamber |
| Power source | AC 220V, 50Hz or AC110V, 60HZ ( can be customized) |
Main Components:
| Name | Specification | Origin |
| Protection box | stainless steel inside, cold rolling SS outside | Sinuo |
| Tempering glass | 220X220X10 | China |
| Venting fan | 150X150 | China |
| Button | Made in China | China |
| Power switch | Made in China | China |
Contact Person: Manager
Tel: +8613527656435
| Factory Address:#301, Building 2, No. 123 of Zhongsheng Road, Zhongcun Street, Panyu District, Guangzhou, China, 511490 | |
| Sales office:#301, Building 2, No. 123 of Zhongsheng Road, Zhongcun Street, Panyu District, Guangzhou, China, 511490 | |
| +86-020-39185976 | |
| sales@sinuotek.com | |
