Payment & Shipping Terms:
|Temperature Rising Time:
|12mm ± 1mm
|45° Or Vertical
|Φ0.5 K Type
flame test chamber,
flammability testing equipment
IEC60695-11-5 Needle Flame Test Chamber Combustible Materials Fire Hazard Testing Equipment
IEC 60695-11-5 specifies a needle-flame test to simulate the effect of a small flame which may result from fault conditions, in order to assess the fire hazard by a simulation technique. The results of this test may be used as elements of a fire hazard assessment which takes into account all of the factors which are pertinent to an assessment of the fire hazard of a particular end use. It is applicable to electrotechnical equipment, its sub-assemblies and components and to solid electrical insulating materials or other combustible materials.
If the test specimen drips molten or having flaming material during the application of the flame, the burner may be tilted up to 45°from the vertical to prevent material from dripping into the burner tube while maintaining an 8mm±1mm spacing between the centre of the top of the burner and the remaining portion of the test specimen, ignoring any strings or molten material.
It is applicable to lighting, low-voltage electrical appliances, household appliances, machine tool electric appliance, electric motor, electric tools, electronic instruments, electrical instruments, electrical connector, such as electrical and electronic equipment and parts, components, including insulation materials, engineering plastic or other solid combustible materials.
|Mitsubishi PLC control, to achieve intelligent control
|True color LCD (standard equip 7 Inch display control touch screen)
|Stainless steel plate with high-grade paint
|Top grade button
|Butane or propane gas having a purity of at least 95%
|Flame application time
|0-9999.9s can be preset
|0-9999.9s display, automatic recording
|Flame temperature rising time
|100℃ ± 2℃ ～ 700℃ ± 3℃ ( room temperature～ 999℃ ) ,23.5s±1.0s (1s ～ 999.9s)
|12mm ± 1mm ( Adjustable )
|Tilt 45°( testing ) or vertical ( when adjust and measure the height of the flame)
|Stainless steel,bore diameter:Φ 0.5mm ± 0.1mm,outer diameter ≤Φ 0.9mm ,length≥35mm
|Imported Omega brand Φ 0.5 armour nickel-chromium / nickel aluminum wire K type thermocouple, temperature resistance 1100°
|Temperature sensing delay
|≥ 0.5m³, black yogon background
|L1100mm × W530mm × H1150mm ,Exhaust aperture:Φ100mm；
|220V /50Hz, 0.5kVA (110V, 60Hz or other power supply can be customized)
|IEC60695-11-5, IEC 60695-2-2
The structure of this tester is stainless steel plate and high-grade spraying outside chamber, using the most advanced PLC control, to achieve intelligent control, standard equip with TFT true color LCD, can achieve upgrade of the customer's humanized operation interface, and truly achieve the comparison result of the international.
Contact Person: Ms. Zoe Zou
Tel: +86 13527656435