Packages under China and Europe standards
There are two types of test packs, ﹣1℃ and ﹣5℃. The production size and quality are as follows:
| Dimensions (mm) | Weight (g) | Dimensional tolerance | Weight tolerance |
| 25x50x100 | 125 | When the side length is 25mm~50mm, the allowable deviation is ±2mm. | ±2% |
| 50x50x100 | 250 |
M test packages with thermocouple wires or pre-embedded copper tubes are also available in -1°C and -5°C specifications. The dimensions and weights are as follows:
| Dimensions (mm) | Weight (g) | Dimensional tolerance | Weight tolerance |
| 50x100x100 | 500 | ±2mm | ±2% |
Packages under Australia standard AS1731.4-2003
The production size and technical requirements of the filling packages are as follows:
| Dimensions (mm) | Weight (g) | Density(Kg/m³) | Weight tolerance |
| 25x50x100 | When the side length is 25mm to 50mm, the allowable deviation is ±2mm; when the side length is 100mm to 200mm, the allowable deviation is ±4mm. | 480±80 | ±2% (mass is calculated from density and volume) |
| 25x100x100 | |||
| 50x100x100 | |||
| 37.5x100x200 | |||
|
50x100x200
|
The M package and test package with thermocouple is made according to the requirements in GB8059.1, and the size and quality are as follows:
| Dimensions (mm) | Weight (g) | Density(Kg/m³) | Weight tolerance |
| 50x100x100 | ±2mm | 480±80 | ±2% (mass is calculated from density and volume) |
Sawdust test packages under AHAMHRF-1 2007/ SASO 2664-2007 standard
This is a test package made of hardwood chips as the main material. The production size and quality are as follows:
| Dimensions (mm) | Weight (g) | Density/Tolerance(Kg/m³) |
| 130±6 × 100±4 × 40±2 | 290±40 | 560±80 |
M sawdust test packages with thermocouples or pre-embedded copper tubes, made in the same dimensions and quality as above.
North American commercial test packages under AS72-2005 standard
The production size and technical requirements of the filling packages are as follows:
| Dimensions (mm) | Weight (g) | Density/Tolerance(Kg/m³) |
| 50 × 100× 100 | ±2mm | ≥473ml |
Contact Person: Ms. Zoe Zou
Tel: +86 13527656435
Fax: 86-020-39185976
| Factory Address:Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China | |
| Sales office:Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China | |
| +86-020-39185976 | |
| sales@sinuotek.com | |
